Installing the HP LaserJet Pro 500 color MFP M570 printer software in Windows on a Wireless Network & Wired Network

1. Installing the HP LaserJet Pro 500 color MFP M570 printer software in Windows on a Wireless Network & Wired Network Using In box CD 1. Press the Power button or switch to flip on the printer, if it is turn off. 2. From the Home display screen on the product control panel, click the Wireless button. 3. Now click Wireless Menu, and then click Wireless Setup Wizard. 4. The product scans for obtainable wireless networks and returns a list of network names (SSIDs). Select the SSID for the local network from the list if it is available. If the SSID for the local network is not in the list, touch Enter SSID, and then manually enter the SSID for the local network. 5. When prompted for the type of network security, choose the correct option for the local wireless network. A keypad opens on the control panel display. If the network make a uses of WPA security, type the WPA passphrase on the keypad. If the network make a uses of WEP security, type the WEP key on the keypad. 6. Touch OK, and then wait while the product establishes a network connection. Establishing the wifi network connection can take a few minutes. 7. Insert the printing system software CD into the CD-ROM drive. The software program installer detects the language of the operating system, and then displays the main menu of the installation program in the same language. If the installer program has not started after 30 seconds, complete these steps: 1. On the Start menu, click the Run option. 2. Type the following: X:\SETUP.EXE (where X is the letter of the CD-ROM drive). 3. Click the OK button. The installer program starts. 8. The Software Selection screen details the software to be installed. The recommended software installation includes the PCL 6 print driver and software for all available product features. To proceed with the recommended software installation, click the Next button. To customize the software installed, click the Customize software selections link. When finished, click the Next button. 9. Read the license agreement, click the I have reviewed and accept the installation agreements check box, and then click the Next button to continue. 10. The Preparing to Install screen displays. When the installer is finished, the Next button will display. Click the Next button to continue

2. 11. When prompted to choose a connection type, select Connect through a wireless network. 12. Click the Automatically find my product on the network option. If the installer cannot find the product, enter the product's IP address, host name, or hardware address manually. Click the Next button. 13. A list of products is displayed on the Network Product(s) Found screen. Select the product from the list, and then click the Next button. 14. When the installation completes, the Product Configuration screen displays. Select whether the product should be the default printer and whether to print a test page. Click the Next button. 15. The Enable HP Web Services screen displays. To enable Web services now, click the Next button. To enable Web services later, click the Cancel button. HP Web services are not required for software installation. 16. The Finish screen displays. From this screen, installation wizards are available to configure additional product features. Configure the additional product features now or later. 17. Click the Finish button to complete the product installation. Installation for a wireless network connection by downloading the software 1. Press the Power button or switch to turn on the printer, if it is not already on. 2. From the Home screen on the product control panel, touch the Wireless button. 3. Touch Wireless Menu, and then touch Wireless Setup Wizard. 4. The product scans for available wireless networks and returns a list of network names (SSIDs).

3. Select the SSID for the local network from the list if it is available. If the SSID for the local network is not in the list, touch Enter SSID, and then manually enter the SSID for the local network. 5. When prompted for the type of network security, select the correct option for the local wireless network. A keypad opens on the control panel display. If the network uses WPA security, type the WPA passphrase on the keypad. If the network uses WEP security, type the WEP key on the keypad. 6. Touch OK, and then wait while the product establishes a network connection. Establishing the wireless network connection can take a few minutes. 7. On the computer, browse to the Drivers & Downloads page for your product: HP LaserJet Pro 500 color MFP M570 8. If prompted, select the product from the list of similar products on the page. 9. Select the correct operating system, and then click Next. 10. Click Driver, and then review the available driver options. The options available vary depending on the product. 11. Click a driver item to select it, review the driver details, and then click Download. 12. If the File Download Security Warning window displays, click Save, and then browse to a location on the computer to save the file. 13. Click Save. The software downloads to the computer. Make note of the saved file location. 14. When the download is complete, click Open Folder, and then click the downloaded file. The file name ends in .exe. Related search hp laserjet pro 500 color mfpm570dn wireless setup hp laserjet pro 500 color mfpm570dn user manual hp laserjet pro 500 color mfpm570dn specifications