1 / 58

Chapter 10

Chapter 10. State Machine Design. State Machine Definitions. State Machine: A synchronous sequential circuit consisting of a sequential logic section and a combinational logic section.

maille
Download Presentation

Chapter 10

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 10 State Machine Design

  2. State Machine Definitions • State Machine: A synchronous sequential circuit consisting of a sequential logic section and a combinational logic section. • The outputs and internal flip flops (FF) progress through a predictable sequence of states in response to a clock and other control inputs.

  3. State Machine Types • Moore Machine: A Finite State Machine (FSM) whose outputs are determined only by the Sequential Logic (FF) of the FSM. • Mealy Machine: An FSM whose outputs are determined by both the sequential logic and combinational logic of the FSM.

  4. State Machine Basics • State Variable: The variable held in the SM (FF) that determines its present state. • A basic FSM has a memory section that holds the present state of the machine (stored in FF) and a control section that controls the next state of the machine (by clocks, inputs, and present state).

  5. State Machine Basics

  6. State Machine Basics

  7. FSM Design Techniques • Classical Design: Makes use of state tables, FF excitation tables, and Karnaugh Mapping to find FF input control logic. • VHDL Design: Uses case statements or IF THEN ELSE statements to set the design and the logic synthesis tools to define equations.

  8. Classical Design Approach – 1 • Define the actual problem. • Draw a state diagram (bubble) to implement the problem. • Make a state table. Define all present states and inputs in a binary sequence. Then define the next states and outputs from the state diagram.

  9. Classical Design Approach – 2 • Use FF excitation tables to determine in what states the FF inputs must be to cause a present state to next state transition. • Find the output values for each present state/input combination. • Simplify Boolean logic for each FF input and output equations and design logic.

  10. FSM Design Example 1 • Gray Code Counter that sequences {000, 001, 011, 010, 110, 111, 101, 100, 000}. • From this the state and excitation table is developed for D flip flops (see Table 10.2 in the textbook).

  11. FSM Design Example 1

  12. FSM Design Example 1

  13. FSM Design Example 2 • From the K-Maps for the inputs D0, D1, and D2, the following equations are developed: • Refer to Figure 10.6 in the textbook.

  14. FSM Design Example 2

  15. VHDL FSM Design • Uses an enumerated type to declare state variables. • Enumerated Type: A user-defined type in which all possible values of a named identifier are listed in a type definition. • An FSM uses a CASE statement on the enumerated type state variable.

  16. FSM VHDL Example -- gray_ct1.vhd -- 3-bit Gray code counter -- (state machine with decoded outputs) LIBRARY ieee; USE ieee.std_logic_1164.ALL;

  17. FSM VHDL Entity ENTITY gray_ct1 IS PORT( clk : IN STD_LOGIC; q : OUT STD_LOGIC_VECTOR(2 downto 0)); END gray_ct1;

  18. FSM VHDL Architecture – 1 ARCHITECTURE a OF gray_ct1 IS TYPE STATE_TYPE IS (s0,s1,s2,s3,s4,s5,s6,s7); SIGNAL state :STATE_TYPE; BEGIN PROCESS(clk) BEGIN

  19. FSM VHDL Architecture – 2 IF (clk’EVENT AND clk = ‘1’) THEN CASE state IS WHEN s0 => state <= s1; WHEN s1 => state <= s2; WHEN s2 => state <= s3; WHEN s3 => state <= s4; WHEN s4 => state <= s5;

  20. FSM VHDL Architecture – 3 WHEN s5 => state <= s6; WHEN s6 => state <= s7; WHEN s7 => state <= s0; END CASE; END IF; END PROCESS;

  21. FSM VHDL Architecture – 4 WITH state SELECT q <= “000” WHEN s0, “001” WHEN s1, “011” WHEN s2 “010” WHEN s3, “110” WHEN s4, “111” WHEN s5, “101” WHEN s6, “100” WHEN s7; END a;

  22. VHDL Output Assignment • The output assignment for the following example could have also been in the CASE test statements (in the process). WHEN s0 => state <= s1; q <= “001”; WHEN s1 => state <= s2; q <= “011”;

  23. FSM with Control Inputs • Same design approach used for FSM such as counters. • Uses the control inputs and clock to control the sequencing from state to state. • Inputs can also cause output changes not just FF outputs.

  24. FSM with Control Inputs

  25. SM Diagram Notation – 1 • Bubbles contain the state name and value (StateName/Value), such as Start/000. • Transitions between states are designated with arrows from one bubble to another. • Each transition has an ordered Input/Output, such as in1/out1.

  26. SM Diagram Notation – 2 • For example, if SM is at State = Start and if in1 = 0, it then transitions to State = Continue and out1 = 1, out2 = 0. • The arrow is drawn from start bubble to continue bubble. • On the arrow the value 0/10 is given to represent the in1/out2,out1.

  27. SM Design – 1 • State Table for the State Diagram

  28. SM Design – 2 • The State Excitation Tables for the JK Inputs

  29. SM Design – 3 • The following equation represents the next state and output logic of the state machine.

  30. SM Design – 4 • The pulser SM has two outputs that are not always synchronized to clock. • The pulse out2 is always synched to a change in clock, but out1 could change if in1 changes. • The following slides show a VHDL implementation of the Pulser SM.

  31. SM Design – 4

  32. SM Design – 4

  33. SM Pulser Architecture – 1 • Uses an enumerated type state listing of start and continue. ARCHITECTURE a OF state_x1 IS TYPE PULSER IS (start, continue); SIGNAL sequence : PULSER; BEGIN PROCESS(clk) BEGIN

  34. SM Pulser Architecture – 2 • A portion of the case statement: IF(clk’EVENT AND clk = ‘1’) THEN CASE sequence IS WHEN start => IF in1 = ‘1’ THEN sequence <= start; out1 <= ‘0’; out2 <= ‘0’;

  35. SM Pulser Architecture – 3 • In the VHDL case statement, an IF conditional test statement was used to check the Input Signal (in1) for State = Start. • IF in1 = 1, stay at State = Start; IF in1 = 0, then move to State = Continue (next clk). • If the present state was continue, the next state is always start, so an IF statement is not required.

  36. Switch Debouncer • A digital circuit that is used to remove the mechanical “bounce” from a switch contact. • When a switch is closed, the contacts bounce from open to closed to cause false transitions. • A simple debouncer is a cross-coupled NAND Latch.

  37. Switch Debouncer

  38. Shift Register Debouncer – 1 • An SR can be used to delay the glitches (bounces) with a slow clock (T = 2.6 ms). • The input of the SR is from the switch, and it is clocked through a 4-bit register. • The output of the SR is compared to the input, and if it is equal, the SR is still loaded.

  39. Shift Register Debouncer – 2 • When the switch bounces, the SR input and output are not equal, so the register stops loading to allow the delay to be added. • The comparison is done by an XNOR gate to control the SR Load.

  40. Shift Register Debouncer – 3 • 4-bit LPM SR clocked every 2.6 ms • If pb_in pb_out for 10.4 ms, the output changes. • If not, then the output remains the same. • Change on the input must be stable for 4 clock cycles before the output changes.

  41. Shift Register Debouncer – 3

  42. SR Debounce Entity • Uses an in from SW (pb_in) and a debounced output (pb_out). ENTITY debouncer IS PORT( pb_in, clock : IN STD_LOGIC; pb_out : OUT STD_LOGIC); END debouncer;

  43. SR Debounce Architecture – 1 ARCHITECTURE debounce OF debouncer IS SIGNAL ctr_q :STD_LOGIC_VECTOR (15 downto 0); SIGNAL srg_parallel_in :STD_LOGIC_VECTOR (3 downto 0); SIGNAL srg_serial_in :STD_LOGIC; SIGNAL srg_serila_out :STD_LOGIC; SIGNAL srg_load :STD_LOGIC;

  44. SR Debounce Architecture – 2 BEGIN clock_divider : lpm_counter GENERIC MAP (LPM_WIDTH => 16) PORT MAP (clock => clock, q => ctr_q);

  45. SR Debounce Architecture – 3 -- shift register clocked by MSB of counter 216 delay_ element : lpm_shiftreg GENERIC MAP (LPM_WIDTH => 4) PORT MAP (clock => ctr_q (15), load => srg_load, data => srg_parallel_in, shiftin => srg_serial_in, shiftout => srg_serial_out);

  46. SR Debounce Architecture – 4 srg_load <= (not pb_in) xnor srg_serial_out; srg_parallel_in (3) <= srg_serial_out; srg_parallel_in (2) <= srg_serial_out; srg_parallel_in (1) <= srg_serial_out; srg_parallel_in (0) <= srg_serial_out; srg_serial_in <= not pb_in; pb_out <= srg_serial_out; END debounce;

  47. Unused States – 1 • Some modulus counters, such as MOD-10, have states that are not used in the counter sequence. • The MOD-10 Counter would have 6 unused states (1010, 1011….1111) based on 4-bits.

  48. Unused States – 2 • An FSM can also have unused states, such as an SM, with only 5 bubbles in the state diagram (5-states). This FSM still requires 3 bits to represent these states so there will be 3 unused states. • These unused states can be treated as don’t cares (X) or assigned to a specific initial state.

  49. Unused States – 2

  50. Unused States Example Slide – 1 • A five-variable state diagram is shown in the previous slide, with unused states assigned to the initial state = Start. • The normal state sequence is StartWait1  Wait2  Pulse1  Pulse2 and then back to Start. • Any other states cause a transition back to Start.

More Related