1 / 8

Meets DOT 106 & SAE J1402

Meets DOT 106 & SAE J1402. Both Ends Swivel After Installation. Factory or Field Assembly. Non-Corrodible Parts in the Air Path. Reinforced Nylon Tube Supports Hose. O-Ring Seals Air & Allows Swivel (-60°F). Brass Fitting Provides “Live Swivel” Fitting Is Retained By Tube & Shell.

maisie
Download Presentation

Meets DOT 106 & SAE J1402

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Meets DOT 106 & SAE J1402 • Both Ends Swivel After Installation • Factory or Field Assembly • Non-Corrodible Parts in the Air Path

  2. Reinforced Nylon Tube Supports Hose O-Ring Seals Air & Allows Swivel (-60°F) Brass Fitting Provides “Live Swivel” Fitting Is Retained By Tube & Shell Reinforced Nylon Shell Provides Consistent Compression of Hose to Seal on the Tube Plated Steel Ring Defines Outside Diameter Standard SAE J1402 Air Brake Hose

  3. Eliminates Swivel Adapters Both Ends Swivel Eases Installation Reduces Stress on Hose Material Extends Hose Life

  4. Molded Shell & Tube Define Squeeze Hose Compression Not Subject to Operator Set Up Molded Shell & Ring Design Allows Visual Inspection of Hose Insertion Depth

  5. Available for 3/8” I.D. ... And for 1/2” I.D. Air Brake Hoses

  6. … or Bulk Packed for 3/8” & 1/2” I.D. Hose In Kits for 3/8” I.D. Hose

  7. By Hand Using A Hex Key or With A Powered Screw Driver ( 3/8 Hose ) HA300 Bench Fixture

More Related