1 / 11

Lessons Learned from HSIP & CMAQ

Lessons Learned from HSIP & CMAQ. By Neil J. Pedersen Maryland State Highway Administrator Washington Briefing March 1, 2010. Performance Management.

makala
Download Presentation

Lessons Learned from HSIP & CMAQ

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lessons Learned from HSIP & CMAQ By Neil J. Pedersen Maryland State Highway Administrator Washington Briefing March 1, 2010

  2. Performance Management • AASHTO defines performance management as an ongoing process that translates strategic goals into relevant and detailed outcome measures and targets which, along with resources, are continuously monitored to ensure progress and achievement of published institutional goals.

  3. Lessons Learned What can be learned from two programs that are currently following performance management principles? • Maryland Highway Safety Improvement Program (HSIP) • Maryland Congestion Management and Air Quality (CMAQ) Program

  4. Highway Safety Improvement Program (HSIP) • Overall Performance Goal: reduce traffic related fatalities and personal injuries • Strategic Highway Safety Plans (SHSPs) define goals with emphasis areas and set measurable objectives: • Emphasis Areas ( based on thorough data review): • Reduce impaired driving • Eliminate hazardous locations • Increase occupant protection • Improve driver competency • Curb aggressive driving • Measurable Objectives: • To reduce motor vehicle fatalities to fewer than 550 by 2010 • To reduce motor vehicle injuries by 10 percent from 2005 to 2010

  5. Highway Safety Improvement Program (HSIP)Cont’d • Priorities set based on B/C analyses, must demonstrate favorably B/C ratio • Decisions made at the state/local level based on addressing state/local problems • Flexibility used but needs enhancing to fund the 4e’s – education/enforcement/engineering/emergency medical services • It is very difficult for federal government to set state targets. For example, we can not treat the states with fatality rate close to one (1 .0) the same as the states with fatality rate over two (2.0).

  6. Congestion Management and Air Quality (CMAQ) • Overall Performance Goal: improve air quality, reduce transportation-related emissions and reduce congestion • State Implementation Plan • Performance Measure: Tons of Volatile Organic Compound (VOCs), Nitrogen Oxide (NOx), Carbon Monoxide (CO) and Particulate Matter (PM), emitted per day for an average weekday from transportation sources • Eligible CMAQ projects need to demonstrate air quality benefits and support emission reduction goals

  7. Congestion Management and Air Quality (CMAQ) Cont’d • MPOs perform analysis at the regional level to ensure conformity with state implementation plan • Decision-making is at the state/local level as long as consistent with the state implementation plan • Use the best methods available using sound performance technical analysis agreed to by USDOT and EPA • A single project type (ITS) can meet multiple program (HSIP & CMAQ) goals

  8. Congestion Management and Air Quality (CMAQ) Cont’d • CMAQ funds various types of projects: • Transit projects (purchase of hybrid buses, subsidize commuter buses during highway construction, etc.) • ITS • HOV-lane • Park-N-Ride • Signal Systemization

  9. Summary What are Components of Successful Performance-based Planning ? • Have clearly defined national goals set by Congress • Have relevant and detailed outcome measures approved by USDOT • Guided by an overall plan • Let each state select its performance targets and strategies • FHWA provides guidance, review, approval and oversight • Monitor progress regularly • Perform data-driven analysis

  10. Summary (cont.) What are Components of Successful Performance-based Planning? • Ability to select a series of projects from different programs to meet a single goal • A single project type, e.g., ITS, can meet multiple program goals, i.e., safety, air quality, etc. • The HSIP program has more clearly defined goals than the combined congestion and air quality goals of CMAQ • Make decisions at the state/local level • Be flexible in funding allocations • Be flexible in technical analysis methods • Identify research needs

  11. Questions??? Thank you

More Related