1 / 13

Finite Element Analysis for Optimization and Problem Solving in Engineering

ZKL's Department of Technical Analyses offers Finite Element Analysis services to optimize designs and solve non-bearing problems. We specialize in structural, dynamic, and optimization analyses for various industries. Contact us for stress and strain analysis, evaluation of structure stiffness, and more.

manuelp
Download Presentation

Finite Element Analysis for Optimization and Problem Solving in Engineering

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ZKL - Výzkum a vývoj, a.s.Jedovnická 8628 00 Brnotel: +420 544 135 180http://www.zkl.eu Department of Technical Analyses Presentation of the Finite Element Analysis (FEA)

  2. Department of Technical Analyses • Department of Technical Analyses is a part of ZKL – Research and Development. Its main task is to perform Finite Element Analyses in order to: • Optimize inner design of new bearings • higher parameters of “NEW FORCE“ bearings • Solve wide range of “non-bearing“ problems within ZKL Group • gripping jaws, pipe bending, etc. • Offer service in the field of Finite Element Analyses to external customers • cooperation with Research Center of Manufacturing Technology Software Equipment: - pre/post-processor: MSC. Patran, MSC.Mentat - linear and nonlinear analysis: MSC. Marc - dynamics and motion analysis: MSC. Adams

  3. Finite Element Analysis TheFinite element analysis allows you to detect critical places in structure of industrial products in following: - productive machines, - transportation, - aviation, - energetic industry, - design of gearboxes and other mechanicalparts.

  4. Offered Finite Element Analyses Structural Analyses: - with linear material model - with non-linear material model - geometrically linear - geometrically non-linear - contact problems - with combined loading Dynamic Analyses: - Modal Analysis (Natural Frequencies) - Frequency Response on Harmonic Excitation

  5. Offered Finite Element Analyses Optimization Analyses: - Parametric Optimization - Topological Optimization - Calibration of Material Models

  6. Analyses in the Field of Bearings • Stress and strain analysis • Evaluation of the structure stiffness • Determination of the reaction moment in bearing • Optimization of the ring raceways geometry • Determination of the limit misalignment

  7. Optimization of inner design of NEW FORCE bearing 22211 → dynamic load rating higher by more than 30 % Equivalent Stress Local Model Contact Stress Global Model Deformation Stiffness Curve

  8. Determination of the limit misalignmentof theball bearing 8

  9. References in Other Fields of Engineering ZKL Hanušovice, a.s. Optimization of gripping jaws in order to improve roundness of manufactured bearing cages → smoother by 32 %

  10. References in Other Fields of Engineering ZKL Hanušovice, a.s. Simulation of the technological processof pipebending →determination of thecritical place

  11. References in Other Fields of Engineering Computational analysis of the steel-composite carrier of the machine tool TM 2000→ compliance reduction: over 20 %

  12. Consulting Services

  13. Contact Leoš Šilhan Executive Director of ZKL - Výzkum a vývoj, a.s. Tel: (+420) 777 733 910 E-mail: leos.silhan@zkl.cz Jiří Prášil, ml. Martin Zbožínek Simulation EngineerSimulation Engineer Tel: (+420) 774 712 216 Tel: (+420) 604 730 306 E-mail: jiri.prasil.ml@zkl.cz E-mail: martin.zbozinek@zkl.cz

More Related