1 / 44

VOIP, VOATM, VOFR

VOIP, VOATM, VOFR. 1. VOIP. Voice over Internet Protocol , tiež nazývané VoIP , IP Telefónia , Internetová telefónia , je prenos komunikácie uskutočňovanej ľudským hlasom cez Internet alebo inú sieť založenú na protokole IP .

mariam-david
Download Presentation

VOIP, VOATM, VOFR

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. VOIP, VOATM, VOFR

  2. 1. VOIP • Voice over Internet Protocol, tiež nazývané VoIP, IP Telefónia, Internetová telefónia, je prenos komunikácie uskutočňovanej ľudským hlasom cez Internet alebo inú sieť založenú na protokole IP. • Protokoly používané na prenos hlasových signálov cez IP sieť = VoIP protokoly • Základ - Network Voice Protocol (1973) navrhnutého pre sieť ARPANET

  3. 1.1 Funkcia • Prichádzajúce telefónne hovory môžu byť automaticky smerované na VoIP telefón, nezávisle na tom, kde sa nachádzate. • Vo viacerých krajinách (USA, Veľká Británia, atď.) sú k dispozícii bezplatne použiteľné telefónne čísla pre použitie vo VoIP. • Pracovníci call centier môžu pri použití VoIP pracovať z ľubovoľného miesta, kde je k dispozícii dostatočne stabilné internetové pripojenie. • Mnohé VoIP balíky služieb obsahujú funkcie verejných sietí, ktoré sú bežne spoplatňované osobitne, prípadne sú miestnym operátorom osobitne spoplatňované, ako napríklad konferenčné hovory, presmerovanie hovoru, automatické opakovanie vytáčania a pod. • VoIP telefóny dokážu spájať viacero služieb dostupných cez Internet vrátane videokonferencií, prenosu dát popri hovore, správy telefónnych a adresových zoznamov a oznamovania online dostupnosti zvolených komunikačných partnerov.

  4. 1.2 VOIP zapojenie ATA – analógový terminálový adaptér

  5. 1.3 Technické detaily Dva najhlavnejšie súperiace štandardy pre VoIP sú Session Initiation Protocol (SIP), vyvinutý pod hlavičkou organizácie IETF, a štandard ITU s označením H.323. Na počiatku bol populárnejším H.323, čo je štandard vychádzajúci z telekomunikačného prostredia, v súčasnosti je už v popredí SIP, s ktorým sa ráta už aj v ústredniach typu IMS.

  6. 1.5 SIP • The SIP (Session Initiation Protocol) is a text-based protocol, similar to the HTTP and SMTP, designed for initiating, maintaining and terminating of interactive communication sessions between users. Such sessions include voice, video, chat, interactive games, and virtual reality. • The SIP defines and uses the following components: • UAC (User agent client) – client in the terminal that initiates SIP signalling • UAS (User agent server) – server in the terminal that responds to the SIP signalling from the UAC • UA (User Agent) – SIP network terminal (SIP telephones, or gateway to other networks), contains UAC and UAS • Proxyserver – receives connection requests from the UA and transfers them to another proxy server if the particular station is not in its administration • Redirectserver – receives connection requests and sends them back to the requester including destination data instead of sending them to the calling party • LocationServer – receives registration requests from the UA and updates the terminal database with them.

  7. All server sections (Proxy, Redirect, Location) are typically available on a single physical machine called proxy server, which is responsible for client database maintenance, connection establishing, maintenance and termination, and call directing. • Basic messages sent in the SIP environment: • INVITE – connection establishing request • ACK – acknowledgement of INVITE by the final message receiver • BYE – connection termination • CANCEL – termination of non-established connection • REGISTER – UA registration in SIP proxy • OPTIONS – inquiry of server options • Answers to SIP messages are in the digital format like in the http protocol. Here are the most important ones: • 1XX – information messages (100 – trying, 180 – ringing, 183 – progress) • 2XX – successful request completion (200 – OK) • 3XX – call forwarding, the inquiry should be directed elsewhere (302 – temporarily moved, 305 – use proxy) • 4XX – error (403 – forbidden) • 5XX – server error (500 – Server Internal Error, 501 – not implemented) • 6XX – global failure (606 – Not Acceptable)

  8. 1.6 Porovnanie H.323 vs. SIP • H.323 • vytvorený pre mediálnu komunikáciu (videokonferencie a pod), robustný • dokáže reagovať na chyby sieťových zariadení • na transport dát využíva RTP/RTCP, SRTP • na vytvorenie spojenia využíva UDP • podporuje všetky kodeky, štandardizované alebo proprietárne • SIP • vytvára relácie medzi dvoma bodmi, nepodporuje multimediálne konferencie • neodstraňuje poruchy sieť. zar. • na transport dát využíva RTP/RTCP, SRTP • na vytvorenie spojenia využíva UDP • podporuje kodeky registrované v IANA

  9. STUN

  10. STUN • Simple Traversal of UDP through NATs (STUN), is a network protocol allowing a client behind a NAT (Network Address Translator) to find out its public address, the type of NAT it is behind and the internet-side port associated by the NAT with a particular local port. This information is used to set up UDP (User Datagram Protocol) communication between two hosts that are both behind NAT routers. The protocol is defined in RFC 3489.

  11. IAX - Inter-Asterisk eXchange • IAX2 is a VoIP protocol that usually carries both signalling and data on the same path. The commands and parameters are sent binary and any extension has to have a new numeric code allocated. Historically this was modeled after the internal data passing of Asterisk modules

  12. IAX2 • IAX2 uses a single UDP data stream (usually on port 4569) to communicate between endpoints, both for signaling and data. The voice traffic is transmitted in-band, making IAX2 easier to firewall and more likely to work behind network address translation. This is in contrast to SIP, H.323 and Media Gateway Control Protocol which are using an out-of-bandRTP stream to deliver information. • IAX2 supports trunking, multiplexing channels over a single link. When trunking, data from multiple calls are merged into a single set of packets, meaning that one IP datagram can deliver information for more than one call, reducing the effective IP overhead without creating additional latency. This is a big advantage for VoIP users, where IP headers are large percentage of the bandwidth usage.

  13. SIP vs IAX • - BandwidthThe bandwidth uses by IAX is less than the one uses by SIP since the messages are binary instead of text messages (SIP). IAX also tries to reduce the headers of the messages reducing therefore the bandwidth used.- NATSignaling and data travel togheter in IAX avoiding the problems of NAT that usually appear in SIP. Signaling and data in SIP travel using different protocols and that is why NAT problems appears. Audio stream have to pass through routers and firewalls. SIP usually needs a STUN server to avoid these problems.- Standarization and useSIP is a protocol standardized by the IETF long time ago and it is widely used by the equipment and software manufacturers. IAX is still being standardized and for that reason not many devices can use it nowadays

  14. SIP vs IAX • - Ports usedIAX uses only one port (4569) to send signalling and data of all the calls. To do it IAX use a trunking system. IAX multiplexes signaling and multiple media streams over a single User Datagram Protocol (UDP). SIP, otherwise, uses one port (5060) for signalling and 2 RTP ports for each audio connection (at least 3 ports). For example, if we have 100 simultaneous calls we should use 200 RTP ports and one port for signalling (5060) . IAX uses only one port for everything (4569)- Audio flow when using a serverIf SIP is using a server signaling messages always pass through the server but audio messages (RTP flow) can travel end to end without passing through the server. In IAX, signaling and data must pass always through IAX server. This increases the bandwidth need by the IAX servers when there are many simultaneous calls.- Other functionalitiesIAX is a protocol developed to VoIP and video transmission and it has interesting functionalities, for example, the possibility to send or receive dialplans. These funtionalities are very interesting if using Asterisk PBX. SIP is a general porpouse protocol and can transmit any information and not only audio or video.

  15. 2. VOATM • Prenáša hlas po ATM sieti • Fragmentácia dát na základe • ATM buniek • na zníženie zdržania pri prenose použité DBCES (Dynamic Bandwith Circuit Emulation Service)

  16. 3. VOFR • Voice Over Frame relay • Fragmentácia – dátové pakety sa delia na menšie časti, ktoré sa rýchlejšie posielajú po sieti • dáta prechádzajú cez VFRAD (Voice Frame Relay Access Devices ) – podľa priority smeruje pakety

  17. Protokolové štandardy: • ADPCM (Adaptive Differential Pulse Code Modulation) – kóduje analógový signál na binárny • CS-ACELP (Conjugate Structure-Algebraic Code Excited Linear Prediction) - kóduje analógový signál na binárny

  18. Použitý zdroj informácií • cisco.netacad.net • www.earchiv.cz/ • wikipedia.org

More Related