Chapter 15 Solutions

1. Chapter 15 Solutions

2. 15.1 What are solutions?

3. solutions are homogenous mixtures. This means solutions contain two or more substances, and are mixed enough to “look all the same”. Solutions do NOT have to be liquids, bronze is a solid solution and air is a gaseous solution.

4. All solutions have two parts. The substance doing the dissolving is the solvent and the substances being dissolved are the solutes. • If you don’t know which is which, the substance you have the most of overall is the solvent

5. The most common solvent is water. It is so common and dissolves so many things that it is often called “the universal solvent”. • Water is a polar molecule because it has a bent shape. Since it is irregularly shaped this means that one side has a slightly positive side and the other is slightly negative, so it acts like a little magnet for other polar solutes. Nonpolar substances will not dissolve in water (we say they are insoluble.) • Like dissolves like – A Polar solute will dissolve in a polar solvent, and non polar solute will dissolve in a non polar solvent.

6. Even when things are soluble in water, or any other solvent, different solutes will dissolve to different amount. The actual amount (in grams) that will dissolve in 100 grams of a solvent is called the solubility. When discussing the solubility of solutes, solutions are classified into 3 types: saturated, unsaturated, and supersaturated.

7. A saturated solution has dissolved as much solute as it can. If you add sugar to iced tea and sugar is just sitting at the bottom of the glass your iced tea is saturated for sugar.

8. B) An unsaturated solution can still dissolve more solute.

9. A supersaturated solution has been “tricked” into dissolving more solute than it should be able to. If any more solute is added to a supersaturated solution, all the extra solute will undissolve (precipitate). This is how sugar crystal candy (rock candy) is made.

11. Because the solubility of solutions is dependent on temperature, chemists represent the amounts that can be dissolved with a • solubility curve:

12. The amount (in grams) of how much will dissolve at a particular temperature is shown on the left side of the graph. Notice this is for all the solutes in 100 grams of water.

13. If the temperature and amount of dissolved solute is on the line shown for that solute, then the solution is saturated. For example, 70 grams of NH3 in 100 grams of water will be a saturated solution at 10 °C.

14. If the temperature and amount of dissolved solute is above the line, then the solution is supersaturated. If the saturated solution of 70 grams of NH3 is very carefully heated, it will still have 70 grams of NH3 at 20 °C. As this amount is above the line, this would be a supersaturated solution.

15. If the temperature and amount of dissolved solute is below the line, then the solution is unsaturated. An unsaturated solution could still dissolve more solute if it is added.

16. Temperature is not the only factor that will affect how much solute can dissolve. Particle size, pressure, and agitation also have an effect.

17. Dissolving happens as the solvent touches the solute and starts to pull it into pieces. This happens only on the outside of the particles of the solute.

18. One big chunk of solute has less outside surface area than a lot of small pieces of solute. Thus, if the solute is crushed or ground it will dissolve faster. This only works for dissolving solids in liquids.

19. Gases are affected by pressure. With high pressure a lot of gas can be squeezed into a little bit of space. High pressures will help gases dissolve in a liquid, and low pressure will help remove the gas from a liquid. This only works for dissolving a gas in a liquid, and is why a carbonated beverage goes “flat” after it is opened.

20. C) When a solid dissolves in a liquid, it takes time for the liquid molecules to grab pieces of the solid and float away. If the liquid is stirred, it speeds up the floating away processes, so more liquid can grab more solid in the same amount of time. Thus stirring or shaking will help a solid dissolve faster in a liquid.

21. When a gas dissolves in a liquid, it is basically trapped by the liquid molecules. If the liquid is stirred, it removes the water molecules that are trapping the gas, and the gas will form bubbles and eventually leave the liquid. This is why shaking a carbonated beverage makes so many bubbles.

22. How to increase solubility for a solid or a gas in a liquid

23. 15.2 Solution Concentration

24. Just knowing that a solution is unsaturated does not indicate much about the solution. Is there only a little bit of solute, or is there a lot • and it is almost saturated? The only way to tell is to know the solutions concentration.

25. In general if there is a lot of solute in the solvent, the solution is called concentrated, and if there is only a little bit of solute in the • solvent it is called dilute. But chemists need a more exact way to know how concentrated or dilute the solution is.

26. How to determine concentration • Molarity = moles of solute divided by the liters of solution • Example 3 moles of HCl in 1 liter would be a 3 molar solution written as 3 M HCl

27. 15.3 Colligative Properties

28. Physical properties of solutions that are affected by how much solute is dissolved are called colligative properties.

29. If a solute dissolved in solutions ionizes (breaks apart into positive and negative parts) these parts will allow electricity to travel through the solution. For example: pure water will not conduct electricity, but if table salt is added, then the sodium and chlorine that break apart will conduct electricity. • NaCl → Na+ + Cl-

30. Solutions that conduct electricity are called electrolytes. The more of an ionizing solute that is dissolved, the better the conduction of electricity will be.

31. On the other hand, solutes that don’t ionize (like sugar because it is a large molecule) will not conduct electricity in water. So sugar water will not conduct electricity. Solutions that don’t conduct electricity are called nonelectrolytes.

32. Boiling point elevation and freezing point depression. If pure water boils at 100 °C, and salt is added, the solution boil at a higher temperature. Thus pasta in salted water boils higher temperature and cooks quicker. If pure water boils at 0, and salt is added, the solute lowers the temperature. This is why “anti-freeze” is added to car engines and salt is added to icy roads. This is also why salt is added to the ice when making ice cream - some of the ice melts to make the rest of the ice colder - cold enough to freeze cream.