1 / 21

LISA Autocollimator

LISA Autocollimator. Jenna Walrath 8/19/09. Laser Interferometer Space Antenna (LISA). Mission Will detect gravitational waves within a frequency range from 0.03 mHz to above 0.1 Hz Structure Three spacecraft in equilateral triangle with 5 million km sides.

marina
Download Presentation

LISA Autocollimator

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. LISA Autocollimator Jenna Walrath 8/19/09

  2. Laser Interferometer Space Antenna (LISA) • Mission • Will detect gravitational waves within a frequency range from 0.03 mHz to above 0.1 Hz • Structure • Three spacecraft in equilateral triangle with 5 million km sides

  3. Laser Interferometer Space Antenna (LISA) http://www.nasa.gov/centers/goddard/images/content/181573main_lisa_LO.jpg

  4. What is an autocollimator? • Optical device for measuring angles • Basic idea is to image something on a camera and measure the deflections of the image Laser Beam splitter CCD or other readout device Lens Mirror

  5. Specifications • Dynamic range of 1° • Noise level of 1nrad/√Hz • Work at a distance of 1m

  6. Initial Design Goal • Instead of point source of light, use a grating • Instead of imaging just one grating, image three—two stationary reference patterns and one dynamic pattern

  7. The Plan LED w/ diffuser Top View Grating CCD Camera Mirror Beamsplitter Lens Two Beamsplitters

  8. Humble Beginnings Side View (sort of) Paper Diffuser Grating Red LED Lens w/ aperture CCD Camera Mirror

  9. Humble Beginnings 6/23/09 High-tech light-shielding device Mirror Light with diffuser and grating Lens with aperture Camera

  10. Improvements to the Plan • double black line in the grating • converging lens between the LED and the grating • Allowed us to get rid of the diffuser • Switched from red (627nm) LED to green (530nm) LED • Encased the whole thing in Styrofoam • Instead of 3 images, just use 1 reference pattern and 1 dynamic pattern (so only one beamsplitter at the end rather than two)

  11. Current Design Green LED light source Auxiliary lens 40R/60T Beamsplitter Grating w/ 135 μm slits Mirror CCD Camera 450mm Planar-Convex Lens 50R/50T Beamsplitter

  12. 8/16/09 High-tech light-shielding device LED 40R/60T beam splitter Auxiliary Lens Grating Camera 50R/50T beam splitter Main Lens Mirror

  13. 8/11/09

  14. Computer Interface Main Pattern Reference Pattern Double black line

  15. Current Status • Dynamic range • We can move our pattern across the length of the camera (3648 pixels) • only limited by the size of the pattern • about 25 peaks in each pattern • Operating distance • still able to get a clear pattern at 1m • The mount was so unstable though, the noise was useless to measure

  16. 8/12/09

  17. Noise

  18. Noise • We have shown that some of our noise is coming from fluctuations in the magnification of the image • Possible causes: • Most likely the expansion and contraction of our grating, which is composed of thin plastic • Vibrations might be causing tiny physical movements of the optical components

  19. Next steps/Improvements • Test photomask grating • Stabilize mirror and beam splitter mounts • Find the best way to take advantage of the reference pattern in the data analysis Photomask AutoCAD drawing with test patterns

  20. In the long run • Make the setup more compact • Folding the beam path • Finding the ideal size for the main lens—as small as possible without sacrificing the quality of the image • Design stable mounting structure and housing for the device • While it’s being designed for LISA, its low noise level and large dynamic range make it useful for a variety of applications

  21. Acknowledgements • I’d like to thank • my advisors, Jens Gundlach and Stephan Schlamminger, as well as everyone at CENPA • The REU directors, Wick Haxton, Warren Buck, and Deep Gupta, as well as Janine Nemerever and Linda Vilett for providing such a great REU experience

More Related