1 / 6

Facilitated Discussion: MOL / OHSA Requirements for “Fall Protection”

Facilitated Discussion: MOL / OHSA Requirements for “Fall Protection”. Occupational Health and Safety Act - R.R.O. 1990, REGULATION 851 INDUSTRIAL ESTABLISHMENTS – http://www.elaws.gov.on.ca/html/regs/english/elaws_regs_900851_e.htm#BK14 Occupational Health and Safety Act –

marissa
Download Presentation

Facilitated Discussion: MOL / OHSA Requirements for “Fall Protection”

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Facilitated Discussion: MOL / OHSA Requirements for “Fall Protection” Occupational Health and Safety Act - R.R.O. 1990, REGULATION 851 • INDUSTRIAL ESTABLISHMENTS – http://www.elaws.gov.on.ca/html/regs/english/elaws_regs_900851_e.htm#BK14 • Occupational Health and Safety Act – http://www.elaws.gov.on.ca/html/statutes/english/elaws_statutes_90o01_e.htm#BK80

  2. Facilitated Discussion: MOL / OHSA Requirements for “Fall Protection” • When is a Fall Protection required? • O.Reg 851, Section 85.  Where a worker is exposed to the hazard of falling and the surface to which he or she might fall is more than three metres (9.8 feet) below the position where he or she is situated…

  3. Facilitated Discussion: MOL / OHSA Requirements for “Fall Protection” …(a) the worker shall wear a serviceable safety belt or harness and lifeline adequately secured to a fixed support and so arranged that the worker cannot fall freely for a vertical distance of more than 1.5 metres; and (b) the fall arresting system described in clause (a) shall, (i) have sufficient capacity to absorb twice the energy and twice the load that under the circumstances of its use may be transmitted to it, and (ii) be equipped with a shock absorber or other devices to limit the maximum arresting force to 8.0 kilonewtons to the wearer. R.R.O. 1990, Reg. 851, s. 85.

  4. Facilitated Discussion: MOL / OHSA Requirements for “Fall Protection” Key Program Components to Consider: • Risk Assessment – identify all fall hazards within the scope of your business that meet the requirements – JHSC or other qualified “competent “ persons based on knowledge experience or training. • Acquire the right equipment to facilitate a safe fall arrest system- Lifelines, lanyards, 5 point fall arrest harness, etc. • Training – all supervision and workers involved • Engineered anchor points or beams • Safety cables / lifelines where applicable • Fall Rescue contingency – communication, rescue lifts / booms, timely • Contractors (Orientation/ fall arrest training) • Equipment maintenance and inspection • Records (Due Diligence)

  5. Facilitated Discussion: MOL / OHSA Requirements for “Fall Protection”

  6. Facilitated Discussion: MOL / OHSA Requirements for “Fall Protection” • Name and list 5-10 specific projects at one/ or several of your companies where Fall Protection may be required • Please list some of the challenges you face in complying with the Fall Arrest requirements. • List 3-5 steps that you will use to ensure that Fall Arrest regulations are complied with when working at the prescribed heights.

More Related