1 / 5

Electrolysis setup

Learn how to set up an electrolysis experiment using test tubes, water tank, battery eliminator, cables, clips, and foil electrodes to observe gas bubble production.

markmrichard
Download Presentation

Electrolysis setup

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Electrolysis setup

  2. Test tubes Water tank Battery eliminator Cables and clips Foil electrodes

  3. Immerse test tube under water, and tilt so that it fills with water: remove air bubbles. Insert electrode, and invert. Keep the mouth below water level, and the tube stays filled with water. tape

  4. Repeat for second electrode.

  5. When all is ready, power on. It may take a few minutes before gas bubbles are visible.

More Related