260 likes | 375 Views
TOOLS SELECTION & SAFETY. TOOL SAFETY. Anytime you work with tools safety must be your primary concern. A few general rules to keep in mind are:
E N D
TOOL SAFETY Anytime you work with tools safety must be your primary concern. A few general rules to keep in mind are: • Protective glasses or goggles should be worn whenever power tools are in use; and when chiseling, sanding, scraping, or hammering overhead, especially if you wear contact lenses. • Wear ear protectors when using power tools, since some operate at noise levels that damage hearing. • Be careful of loose hair and clothing, so they don't get caught in tools. • The proper respirator or face mask should be worn when sanding or sawing or using substances with toxic fumes. • Keep blades sharp. A dull blade requires excessive force, can slip, and cause accidents.
6. Always use the appropriate tool for the job. 7. Repair or discard tools with cracks in the wooden handles, or chips in the metal parts, that could fail and cause injury. 8. Don't drill, shape, or saw anything that isn't firmly and properly secured. 9. Take care in storing oily rags, which can spontaneously combust. 10. Don't abuse your tools. 11. Keep a first aid kit on hand. 12. Don't work with tools if you are tired. That's when most accidents occur. 13. Read the owner's manual for all tools and know the proper use of each. 14. Keep all tools out of reach of small children. 15. Unplug all power tools when changing settings or parts.
HAMMERS BALL PEIN CLAW Shaping metal General nailing MALLET CLUB Hitting soft objects Light demolition SLEDGE NAILER Heavy demolition Power nailing
NAILS Broad flat head Flat head Used for floors and other areas where the nail head can be visible. Small head is easy to hide. Small projects
United States Penny Sizes In the U.S., the length of a nail is designated by its “penny size”, written with a number and the letter “d”; for example, 10d for a ten-penny nail. A larger number means a longer nail. Penny sizes originally referred to the price for a hundred nails in England in the 1400’s. The “d” is an abbreviation for denarius, A Roman coin similar to a penny. 2d penny = 1” 3d penny = 1-1/4” 4d penny = 1-1/2” 5d penny = 1-3/4” Etc.
HAND BACK POWERED RECIPROCATING BAND SAW SAW TYPES
HAND SAWS COPING SAW Used to cut intricate patterns and shapes in wood.
HAND SAWS HACKSAW Thin-bladed saws used to cut metal or plastic.
HAND SAWS Keyhole Saw Used to cut holes into soft wood or drywall.
HAND SAWS RIP AND CROSSCUT SAWS
BACK SAWS MITER SAWS Back saws have thinner blades with finer teeth that can only cut so deep. They are used with a “miter box” which controls the angle and depth of the cut.
POWERED SAWS CIRCULAR SAW
POWERED SAWS TABLE SAWS
POWERED SAWS RADIAL ARM SAW
POWERED SAWS CHOP SAW
POWERED SAWS CONCRETE SAW
RECIPROCATING SAWS JIGSAW Straight or curved cuts
RECIPROCATING SAWS SAWZALL
RECIPROCATING SAWS SCROLL SAW Can cut almost any shape in wood or plastic.
BAND SAWS BAND SAW