1 / 7

TECHNICAL INFORMATION

HS 101 SINGLE CORNER WELDING MACHINE. FEATURE Pneumatic and fully automatic. PVC profiles used for joining the corner. Source and profile allows you to adjust the pressure. Heating for waiting times (and analog) can be adjusted. Resource angles can be adjusted between 30-180 degrees.

melinda-oliver
Download Presentation

TECHNICAL INFORMATION

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. HS 101 SINGLE CORNER WELDING MACHINE FEATUREPneumatic and fully automatic.PVC profiles used for joining the corner.Source and profile allows you to adjust the pressure.Heating for waiting times (and analog) can be adjusted.Resource angles can be adjusted between 30-180 degrees. TECHNICAL INFORMATION Voltage / Frequency 220 V / 50 Hz Total Power 2 Kw Air Pressure 6-8 Bar Air Consumption 150 Lt./min Max. Height profile 120 mm Max. Profile Width 120 mm Heating Time 25 s(+/-)%10 Resource Time 25 s(+/-)%10 Heater Temperature 250°C (+/-)%10 Machine Length 500 mm Machine Width 650 mm Machine Height 1400 mm Machine Weight 185 kg Control System Micro Computer

  2. HS 201 AUTOMATIC MULLION Milling Machine FEATUREPneumatic and fully automatic.Fastening the middle register is used for connections of PVC profiles.Recording medium allows the practice profiles of different angles.Pneumatic clamping system allows. TECHNICAL INFORMATION Voltage / Frequency Total Power Air Pressure Air Consumption Max. Height profile Max. Profile Width Machine Length Machine Width

  3. CITA HS301 AUTOMATIC CUTTING MACHINE FEATUREPneumatic and fully automatic.Screed is suitable for cutting PVC profiles 45 degrees.Feed can be adjusted for the horizontal vibration and precise cuts.Pneumatic clamping system. TECHNICAL INFORMATION

  4. HS 401 AUTOMATIC MACHINE FOR CUTTING OUT ALTAN FEATUREPneumatic and fully automatic.Suitable for cutting PVC profiles.45 ° -90 ° -45 ° angles has a value for the special spot.Saw feed can be adjusted.Pneumatic clamping system can be cut between 25 ° -0 ° -25 ° angles.Diamond saw blade diameter 400 mm.Meter system, dayaması machine and bench accessories. TECHNICAL INFORMATION TotalPower Air Pressure Air Consumption Saw Diameter Max. Height profile Max. Profile Width Machine Length Machine Width Machine Height Machine Weight Table Length

  5. HS 501 Pantograph DISCHARGING WATER DRILLING MILLING MACHINE OF 3-ARM FEATURE Pneumatic and fully automatic.PVC profiles the key areas where the hinge slots and holes for the arm is used.Yarıklarını various angles used to open the drain.Vertical axis, head of copies, triple drilling horizontal axis.Universal template is available, upon request made in the template. TECHNICAL INFORMATION

  6. HS 601 AUTOMATIC CORNER CLEANING MACHINE FEATURE Pneumatic and fully automatic.Corner cleaning is used to make PVC profiles after welding.Upper and outer surfaces of the lower-corners clean.Blade models are 2-4-6-8 when prompted. TECHNICAL INFORMATION

More Related