1 / 12

Back-End Bonding

Glue Pitch Adaptors. Robot I&J2500. Back-End Bonding. Glue Beetle Chip to Hybrid. H&K 710 bonder. Robot I&J2500. The I&J2500 has a work area of 510 x 510mm. We mount a turn plate to the work holder that allows us to hold the hybrid for accurate dispensing of the glue. Requirements.

mgrasso
Download Presentation

Back-End Bonding

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Glue Pitch Adaptors Robot I&J2500 Back-End Bonding Glue Beetle Chip to Hybrid H&K 710 bonder

  2. Robot I&J2500 The I&J2500 has a work area of 510 x 510mm. We mount a turn plate to the work holder that allows us to hold the hybrid for accurate dispensing of the glue. Mike Wormald mpw@liv.ac.uk

  3. Requirements Glue pitch adaptors to LHCB hybrids. • Making sure all the bond pads are supported with glue, as bonding is impossible with bounce under the pads. • Even spread of glue for planarity. (Bonding jigs vacuum this area down) • Ensure no overspill of glue that would hinder the position of the sensors or cover bond pads for the chips • Correct location of the pitch adaptors. Mike Wormald mpw@liv.ac.uk

  4. Process • Dispense Glue • Place pitch adaptors Mike Wormald mpw@liv.ac.uk

  5. Process • Apply Weights • Leave to cure • In oven at 40◦c for 1hour. • Visually inspect. • Remove any excess or fill unsupported areas. • Chips can be mounted at this stage • Place back in oven for further two hours Mike Wormald mpw@liv.ac.uk

  6. Glue chips to Hybrid Requirements • Planarity, 710 bonder only has one touchdown per reference system but chips are bonded on all three faces. • No overspill of conductive glue that may cause shorts on the hybrid • Accurate placement –ease of bonding front end- Mike Wormald mpw@liv.ac.uk

  7. Dispense Glue Mike Wormald mpw@liv.ac.uk

  8. Place Chips Mike Wormald mpw@liv.ac.uk

  9. Accurate Position Mike Wormald mpw@liv.ac.uk

  10. Back End Bonding Mike Wormald mpw@liv.ac.uk

  11. Screen shot of bonds with overlay Mike Wormald mpw@liv.ac.uk

  12. The End Mike Wormald mpw@liv.ac.uk

More Related