1 / 18

Simulation for Fast Focusing DIRC R&D

This research focuses on the simulation of a fast focusing DIRC prototype for improved photon detection and measurement accuracy in high luminosity experiments.

mhinkle
Download Presentation

Simulation for Fast Focusing DIRC R&D

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Simulation for Fast Focusing DIRC R&D Focusing DIRC R&D effort at SLAC: Jose Benitez # Gholam Mazaheri # Larry L. Ruckman + Gary S. Varner + • David W.G.S. Leith # • Blair N. Ratcliff # • Jochen Schwiening# • Jerry Va’vra # # SLAC+ University of Hawai’i • Acknowledgements: • M. McCulloch and B. Reif (prototype construction) • I. Bedajanek and J. Uher (software development) • K. Suzuki (beam test) Most of the Geant4 simulation work done by Ivan Bedajanek (Prague) during six month stay at SLAC in 2005/2006.

  2. Motivation Goal: • Super-B will have 100x higher luminosity • Backgrounds are not yet understood, but they would scale with the luminosity if they are driven by the radiative Bhabhas →Future DIRC needs to be smaller and faster: Focusing and smaller pixels can reduce the expansion volume by a factor of 7-10 Faster PMTs reduce sensitivity to background. Additional benefit of the faster photon detectors: • Timing resolution improvement: s ~1.7ns (BABAR DIRC) →s150ps (~10x better)which allows measurement of photon color to correct the chromatic error of qc(contributes s ~ 5.4 mrads in BABAR DIRC) Focusing mirror effect: • Focusing eliminates effect of the bar thickness (contributes s ~ 4 mrads in BABAR DIRC) • However, the spherical mirror introduces an aberration, so its benefit is smaller.

  3. Beam Test Setup in 2006 Beam spot: s < 1mm Lead glass: For latest status of our R&D see my talk at RICH 2007 workshop http://rich2007.ts.infn.it/ • SLAC 10 GeV/c electron beam in End Station A • Beam enters bar at 90º angle • Prototype is movable to 7 beam positions along bar • Time start from the LINAC RF signal, but correctable with a local START counter • SLAC-built amplifier and constant fraction discriminator • TDC is Phillips 7186 (25ps/count), CAMAC readout Local START time: s ~36ps

  4. Focusing DIRC Prototype Optics • Radiator: • 1.7 cm thick, 3.5 cm wide, 3.7 m long fused silica bar (spares from BABAR DIRC). • Optical expansion region: • filled with a mineral oil to match the fused silica refraction index (KamLand oil). • include optical fiber for the electronics calibration (PiLas laser diode). • Focusing optics: • a spherical mirror with 49cm focal length focuses photons onto a detector plane.

  5. Focusing DIRC Prototype Photon Detectors snarrow ≈70ps time (ns) snarrow ≈140ps time (ns) • 1) Burle 85011-501 MCP-PMT (64 pixels, 6x6mm pad, sTTS ~50-70ps) Timing resolutions were obtained using a fast laser diode (PiLas) in bench tests with single photons on pad center. • 2) Hamamatsu H-8500 MaPMT (64 pixels, 6x6mm pad, sTTS ~140ps) 3) Hamamatsu H-9500 Flat Panel MaPMT (256 pixels, 3x12mm pad, sTTS ~220ps) snarrow ≈220ps time (ns) Nucl.Inst.&Meth., A 553 (2005) 96

  6. Prototype Simulation Each detector pixel determines many photon parameters assuming an average : c, cos  cos  cos Photon path length, time-of-propagation, number of photon bounces. We obtain those photon parameters for each pixel using Geant4 simulation • Detailed Geant4 simulation • complete physics, photon transport and detection • for studying performance, backgrounds, corrections, systematics, etc • future optics design, etc • Fast Geant4 simulation • simple “photon gun” at end of bar (no scattering or inefficiencies) • for calculating for each pad the photon track parameters for average λ • Fast ray tracing toy Monte Carlo and graphical ray tracing software • for initial design and cross-check of Geant results

  7. Detailed Geant4 Prototype Simulation 10 GeV/c electron beam at 90 deg angle, beam position adjustable, beam spot size randomized 3.675 m long DIRC fused silica bar, mirror at one end Detailed photon propagation includes reflection coeff as function of λ and polish as measured at SLAC Fused silica block at other bar end Epotek 301-2 glue between bars and at block Complex shape of expansion volume KamLand mineral oil in expansion volume 49 cm focal length spherical mirror Up to 7 PMTs mounted on quartz window Different timing resolution for Burle MCP-PMTs and Hamamatsu MaPMTs, incl. non-Gaussian tail Individual uniformity/efficiency variation for each PMT as measured at SLAC Each PMT location aligned to match beam test data occupancy

  8. Generation of photons blue: electron yellow: outline of radiator bar magenta: tracks of detected Cherenkov photons

  9. Detection of photons Use SLAC R&D measurement results in 2D scanning setup to simulate: Hits on PMT registered according to individual PMT and pad efficiencies Probability for hit to cause charge sharing in neighbor pad(s)

  10. Simulated Event Up to ~1000 Cherenkov photons produced~300 transported (cuts on photon angles) Typically 15-30 detected

  11. Simulation Results Predicted photon hit location on detection plane without pixelization (Full G4 sim) → “ring” image significantly wider in outer slots(longer photon paths - plus other effects showing up in the wings?) y position (cm) x position (cm) Note different scale in x and y Size of single pixel is 6mm x 6mm / 3mm x 12mm

  12. Simulation Results Predicted photon hit occupancy for fast Geant sim (photon gun to all PMT pixels) low statistics plot, 2005 detector config. Predicted photon hit location for central PMT without pixelization (fast Geant sim) Interesting structures become visible. y position of hit (cm) x position of hit (cm)

  13. Simulation Results Predicted photon hit location for production polar angle fixed to 822mrad (fast Geant sim)→ observe good focusing in center of detection plane, large optical aberrations (“fringes”) towards outer slots result of our current mirror design, need to improve in future design y position of hit (cm) x position of hit (cm)

  14. Simulation Results Another way of looking at the optical aberration (ray tracing toy MC) → fringe effect grows from 0 mrad at ring center to 9 mrad in outer wings of Cherenkov ring note different x,y scale compared to previous plot

  15. Simulation Results Mirror Photon propagation time in bar for beam position closest to detector (Full G4 sim) Good agreement but simulation has less background than data (also true for G4 simulation in BaBar DIRC) peak 1 reflections at glue/barboundaries red: beam data blue: G4 simulation peak 2 photon propagation time (ns)

  16. Location of the Cherenkov ring (Occupancy) Aug 2006 data full Geant4

  17. θc resolution θc resolution (mrad) Photon path length (m) Comparison shown for small pixels (Hamamatsu H-9500), 3mm x 12mm pad size

  18. Conclusion We have a detailed standalone Geant4 simulation of our Focusing DIRC prototype in End Station A. Photon propagation in bar simulated in more detail than BaBar DIRC. The simulated occupancy and resolution agree well with beam test data. The simulation could be useful as basis for SuperB barrel PID simulation. Our local Geant expert left in 2006, our ability to modify/upgrade simulation quite limited (change alignment and PMT properties). Looking towards the near future: try different focusing optics designs, identify best location for photon detectors in new standoff box, study coupling of existing DIRC bars and bar boxes to new standoff box, etc – this goes beyond our current level of expertise

More Related