1 / 26

A Petrophysical Comparison of the Barnett and Woodford Shales

A Petrophysical Comparison of the Barnett and Woodford Shales. Jeff Kane Bureau of Economic Geology PBGSP Annual Meeting February 26-27, 2007. Overview. Modeling the Barnett mineralogy – problems and solutions A look at the Woodford – a compare and contrast approach

miakoda
Download Presentation

A Petrophysical Comparison of the Barnett and Woodford Shales

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. A Petrophysical Comparison of the Barnett and Woodford Shales Jeff Kane Bureau of Economic Geology PBGSP Annual Meeting February 26-27, 2007

  2. Overview • Modeling the Barnett mineralogy – problems and solutions • A look at the Woodford – a compare and contrast approach • Finish up – possible ramifications of the differences Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

  3. Constituents of the Barnett – XRD data (weight %) Data from 64 samples with the exception of 35 samples for siderite and 325 samples for Kerogen/TOC. Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

  4. Constituents of the Barnett – Kerogen weight fraction estimation (from Guidry and Olszewski, 1990) where: Wk is the weight fraction of kerogen in the sample TOC is the weight fraction of total organic carbon in the sample S1 is the weight fraction of free oil in the rock sample CS1 is the weight fraction of carbon in the free oil and Ck is the weight fraction of carbon in the kerogen Guidry and Olszewski (1990) suggest 0.87 and 0.75 for CS1 and Ck respectively. Jarvie (1999) recommends a value of 0.83 for CS1. Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

  5. Log response – Log models work in volume fractions where: Vi is the volume fraction of constituent i Wi is the weight fraction of constituent i rB is the bulk density ri is the density of constituent i Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

  6. Constituents of the Barnett – XRD data (weight %) Data from 64 samples with the exception of 35 samples for siderite and 325 samples for Kerogen/TOC. Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

  7. Constituents of the Barnett – XRD data (volume %) Data from 64 samples with the exception of 35 samples for siderite and 325 samples for Kerogen/TOC. Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

  8. Log response – Kerogen • Kerogen • Density about 1 to 1.2 gm/cc; however probably more variable than this range suggests (Guidry and Olszewski, 1990; Jarvie, personal communication; Mendelson and Toksöz, 1985) • Modeling work suggests that 1 gm/cc works reasonably well Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

  9. Log response – Kerogen • Kerogen • Has a hydrogen index of 0.65 to 0.8 (with water having a hydrogen index of 1.0) (Mendelson and Toksöz, 1985) • Again modeling work shows a value of 0.8 works reasonably well • Does not conduct electricity • The organic material responsible for kerogen also tends to fix uranium during deposition Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

  10. Estimation of Kerogen from log data (uranium) – Blakely #1 Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

  11. Blakely #1 Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

  12. Estimation of Kerogen from log data (total gamma ray) – Blakely #1 Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

  13. Log response – Pyrite • Pyrite • Density (RHOB) reads 5.0 gm/cc • 1% pyrite shifts density log by about 0.023 gm/cc (Clavier and others, 1976) • The photoelectric factor (PEF) reads 17 b/e • The thermal neutron log (NPHI, CNC, etc.) reads -2% in pure pyrite • Appears to vary with porosity (Clavier and others, 1976) Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

  14. Log response – Pyrite • Pyrite • The resistivity of pyrite ranges from 0.00001 - 0.8 ohmm • The affect on logs varies with measurement frequency (induction logs are more affected than laterologs) and distribution in the rock • As little as 3% pyrite by volume can cause a reduction of 50% in the measured resistivity for an induction log (Clavier and others, 1976) • Fortunately it doesn’t affect the gamma ray Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

  15. Log response – Pyrite (T.P. Sims #2) Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

  16. Constituents of the Barnett – XRD data (volume %) Data from 64 samples with the exception of 35 samples for siderite and 325 samples for Kerogen/TOC. Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

  17. Constituents of the Barnett – XRD data (model volume %) Data from 64 samples with the exception of 35 samples for siderite and 325 samples for Kerogen/TOC. Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

  18. Petrophysical modeling - T. P. Sims #2 Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

  19. Constituents of the Barnett – XRD and log derived data (model volume %) Constituents of the Barnett – XRD data (model volume %) XRD data from 64 samples with the exception of 35 samples for siderite and 325 samples for Kerogen/TOC. Log data from entire Barnett interval of T. P. Sims #2 XRD data from 64 samples with the exception of 35 samples for siderite and 325 samples for Kerogen/TOC. Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

  20. To review • A reasonable compositional model is available for the Barnett accounting for the presence of kerogen, pyrite, non-clay silicates, carbonate material and clay. • It requires at a minimum, gamma ray, compressional sonic, neutron, density, PEF, and resistivity logs. • Sufficient information to derive a direct relationship between kerogen volume and log data (i.e. GR) is necessary for model stability • The analysis can be enhanced with the inclusion of a spectral gamma ray Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

  21. Comparison of the Barnet and Woodford – XRD data (volume %) Constituents of the Barnett – XRD data (volume %) Data from 64 samples with the exception of 35 samples for siderite and 325 samples for Kerogen/TOC. Barnett data from 64 samples with the exception of 35 samples for siderite and 325 samples for Kerogen/TOC. Woodford data from 49 samples with the exception of 106 samples for Kerogen/TOC Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

  22. Uranium content – Barnett and Woodford Uranium (ppm) distribution in Woodford (CBP) Uranium (ppm) distribution in Barnett (Blakely #1) Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

  23. Uranium distribution – Barnett - Pervasive (more or less) – Blakely #1 Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

  24. Uranium distribution – Woodford – Stratigraphic controls? - CBP Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

  25. To conclude • A reasonable compositional model is available for the Barnett accounting for the presence of kerogen, pyrite, non-clay silicates, carbonate material and clay. • This model appears to also work in the Woodford with differing clay parameters (illite-corensite vs. illite-smectite). • It requires at a minimum, gamma ray, compressional sonic, neutron, density, PEF, and resistivity logs. • Sufficient information to derive a direct relationship between kerogen volume and log data (i.e. GR) is necessary for model stability. Such a relationship exists in the Barnett and can be assumed to exist in the Woodford. • The analysis can be enhanced with the inclusion of a spectral gamma ray in the log suite. • Better kerogen estimation and better stratigraphic correlation Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

  26. To conclude • The Woodford has about 50% more clay per unit volume than the Barnett. This will affect the mechanical properties and probably means that frac jobs will be less efficient in the Woodford with respect to the Barnett • This invites an area of investigation involving mechanical properties in the two formations (subtle hint for shear sonic data) • The Woodford also has about half the kerogen per unit volume than the Barnett. Pressure and temperature arguments aside, this will lower the gas in place numbers with respect to the Barnett. • The kerogen distribution in the Woodford appears to have stronger stratigraphic controls on it than in the Barnett Jeffrey A. Kane, Bureau of Economic Geology , PBGSP Annual Meeting, February 26-27, 2007

More Related