400 likes | 426 Views
Proper Automotive Waste Management - Problems. By Christine Flowers and Raleigh Ross Sponsored by the California Integrated Waste Management Board. Environmental Impact. Understanding The Environment The Impact A Global Approach Global Warming Depletion of the Ozone Layer
E N D
Proper Automotive Waste Management - Problems By Christine Flowers and Raleigh Ross Sponsored by the California Integrated Waste Management Board
Environmental Impact • Understanding The Environment • The Impact • A Global Approach • Global Warming • Depletion of the Ozone Layer • Air Pollution • Water Pollution
Environmental Impact • Groundwater Depletion • Habitat Destruction and Species Extinction • Chemical Risks • Environmental Racism
Worker Safety – Shop Safety • Floor clean-up • Battery safety • Fuel leaks • General awareness
Worker Safety - Hazards • Inhalation Hazards • Dermal Absorption Hazards • Ingestion Hazards
Worker Safety - Hazard Communication • “Worker’s Right to Know” • Hazard Communications Standard • Labeling of Hazardous Materials • Labeling of Hazardous Wastes • MSDS
Health Hazard • 0 - Ordinary Combustible Hazard in a Fire • 1 - Slightly Hazardous • 2 - Hazardous • 3 - Extreme Danger • 4 - Deadly
Flammability • 0 - Will Not Burn • 1 - Will Ignite if Preheated • Flash point. above 200°F • 2 - Will Ignite if Moderately Heated • Flash point below 200°F • 3 - Will Ignite at Ambient Conditions • Flash point below 100°F • 4 - Burns Readily at Ambient Conditions • Flash point below 73°F
Reactivity • 0 - Stable Even Under Fire Conditions and Not Reactive with Water • 1 - Unstable if Heated • 2 - Violent Chemical Change • 3 - Shock and Heat May Detonate • 4 - May Detonate at Normal Temperatures and Pressures
Special Hazard • OX - Oxidizer • ACID - Acid • ALK - Alkali • COR - Corrosive • W - Use No Water, Reacts! • - Radioactive
Regulations • What is Hazardous Waste? • The EPA defines wastes as hazardous if they exhibit a “characteristic”, or are on a “list” • Four Characteristics of an EPA Hazardous Waste: • Ignitability • Corrosivity • Reactivity • Toxicity • Determining if a Waste is Hazardous • Is Your Waste Hazardous?
Ignitability • Ignitability - flash point of less than 140F • Parts washer petroleum solvents • Solvent-based paint waste • Waste kerosene or gasoline Introduction 1-8 (b)
Corrosivity • Corrosivity - pH less than or equal to 2.0, or greater than or equal to 12.5 • Acid or alkaline cleaning solutions • Battery acid Introduction 1-8 (c)
Reactivity • Reactivity - when mixed with water: reacts violently, forms explosive mixture, generates toxic gases, or contains cyanides or sulfides that are released when exposed to acid or alkaline materials, or is explosive. • Pressurized aerosol cans Introduction 1-8 (d)
Toxicity • Toxicity - fails the "Toxicity Characteristic Leaching Procedure" (TCLP) lab test for any one of 40 TCLP parameters. • Paint-contaminated wastes • Oil-contaminated wastes, such as used oil absorbent or rags. Introduction 1-8 (e)
Acetone Nitrobenzene Toluene Methyl Ethyl Ketone (MEK) Benzene F-Listed Hazardous Wastes • Methylene Chloride • 1,1.1-trichloroethane (TCE) • Chlorinated Fluorocarbons (freons) • Xylene • Wide variety of common wastes fond in vehicle maintenance shops. These include: Introduction 1-10 (a)
Other Listed Hazardous Wastes • K-Listed Wastes - uncommon in vehicle maintenance operations. • P-Listed Wastes - acutely toxic chemicals in unused form only. • U-Listed Wastes - toxic commercial chemicals, off-specification products in unused form. Introduction 1-10 (c)
Waste Generators • How Are Waste Generators Categorized? • What a Hazardous Waste Generator Must Do • What “CESQG” Means to Your Shop
Material Safety Data Sheet An Overview
Section 1Identity and General Info. • Manufacturer’s Name • Address • Emergency Phone Number • Information Phone Number • Date Prepared • Signature of Preparer
Section 2 Hazardous Ingredients • Hazardous Components • Specific Chemical Identity/Common Names • OSHA PEL • Permissible Exposure Limit • ACGIH TLV • American Conference of Govt. Industrial Hygienists • Threshold Limit Value • Other Limits Recommended • Percentage (optional)
Section 3 Phys./Chem. Characteristics • Boiling Point • Specific Gravity (H2O = 1) • Vapor Pressure (mm Hg) • Melting Point • Vapor Density (Air = 1) • Evaporation Rate (Butyl Acetate = 1) • Solubility in Water • Water Reactivity • Appearance and Odor
Section 4Fire / Explosion Hazard Data • Flash Point (Method Used) • Auto-Ignition Temperature • Flammable Limits • LEL (Lower Explosion Limit) • UEL (Upper Explosion Limit) • Extinguishing Media • Special Fire Fighting Procedures • Unusual Fire and Explosion Hazards
Section 5Reactivity Data • Stability • Unstable • Conditions to Avoid • Stable • Incompatibility (Materials to Avoid) • Hazardous Decomposition or Byproducts • Hazardous Polymerization • May Occur • Conditions to Avoid • Will Not Occur
Section 6Health Hazardous Data • Routes of Entry • Inhalation, Skin, Ingestion • Health Hazards (Acute and Chronic) • Carcinogencity • NTP, IARC, OSHA • Signs and Symptoms of Exposure • Medical Conditions Generally Aggravated by Exposure • Emergency and First Aid Procedures
Section 7Precautions - Safe Handling • Steps to Be Taken in Case Material is Released or Spilled • Waste Disposal Method • Precautions to Be Taken in Handling and Storing • Other Precautions
Section 8Control Measures • Respiratory Protection • Ventilation • Local Exhaust, Special, Mechanical (General), Other • Protective Gloves • Eye Protection • Other Protective Clothing or Equipment • Work/Hygienic Practices
Hazardous Materials Information System (HMIS) HEALTH FLAMMABILITY REACTIVITY PROTECTIVE EQUIPMENT
Health HEALTH • 0 - Minimal Hazard • No significant risk to health • 1 - Slight Hazard • Irritation or minor reversible injury possible • 2 - Moderate Hazard • Temporary or minor injury may occur • 3 - Serious Hazard • Major injury likely unless prompt action is taken and medical treatment is given
Health HEALTH • 4 - Severe Hazard • Life threatening, major or permanent damage may result from single or repeated exposures Note: An asterisk (*) or other designation indicates that there may be chronic health effects present. See the MSDS for the material in question
Flammability HEALTH FLAMMABILITY • 0 - Minimal Hazard • Materials that are normally stable and will not burn unless heated • 1 - Slight Hazard • Materials that must be preheated before ignition will occur. Flammable liquids in this category have flash points at or above 200ºF
Flammability HEALTH FLAMMABILITY • 2 - Moderate Hazard • Materials that must be moderately heated before ignition will occur. Flammable liquids in this category have flash points at or above 100ºF and below 200ºF • 3 - Serious Hazard • Materials capable of ignition under almost all normal temperature conditions. Flammable liquids in this category have flash points below 73ºF and boiling points above 100ºF as well as liquids with a flash point between 73ºF and 100ºF
Flammability HEALTH FLAMMABILITY • 4 - Severe Hazard • Very flammable gases or very volatile flammable liquids with flash points below 73ºF and boiling points below 100ºF
Reactivity HEALTH FLAMMABILITY REACTIVITY • 0 - Minimal Hazard • Materials that are normally stable, even under fire conditions, and will not react with water • 1 - Slight Hazard • Materials that are normally stable,but can become unstable at high temperatures and pressures. These materials may react with water, but they will not release energy violently
Reactivity HEALTH FLAMMABILITY REACTIVITY • 2 - Moderate Hazard • Materials that, in themselves, are normally unstable and that readily undergo violent chemical change, but will not detonate. These materials may also react violently with water • 3 - Serious Hazard • Materials that are capable of detonation or explosive reaction, but which require a strong initiating source or which must be heated under confinement before initiation; or materials that react explosively with water
Reactivity HEALTH FLAMMABILITY REACTIVITY • 4 - Severe Hazard • Materials that are readily capable of detonation or explosive decomposition at normal temperatures and pressures
Protective Equipment HEALTH FLAMMABILITY REACTIVITY • Safety glasses • Face shield • Gloves • Respirator • Special clothing PROTECTIVE EQUIPMENT
Chronic Effects • Chronic health effects are not rated because of the complex issues involved and the lack of standardized classifications and test. However, based on information provided by the manufacturer/supplier, chronic effects may be indicated by (1) an asterisk (*) or other designation after the health hazard rating corresponding to other information that may be available; or (2) written warnings in the upper white section of the HMIS label.