1 / 60

Material Testing and Field Compliance Test

Material Testing and Field Compliance Test. Universal Rural Roads Access Program Training of Trainers for Contractors 02 – 07 August 2013, Chancho. Ethiopian Roads Authority. Presentation Outline. Background Need for Testing and Specification Material Laboratory Testing

michelle-avery
Download Presentation

Material Testing and Field Compliance Test

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Material Testing and Field Compliance Test Universal Rural Roads Access Program Training of Trainers for Contractors 02 – 07 August 2013, Chancho Ethiopian Roads Authority

  2. Presentation Outline • Background • Need for Testing and Specification • Material Laboratory Testing • Field Compliance Test • Test data management & QC

  3. Background • Road formation • Site clearance • Earth work/ embankment construction • Subgrade construction • Subbase and • Surfacing

  4. Engineered natural surfaces Typical gravel road cross section

  5. Embankment/Subgrade • Material quality Requirements for borrow material, Earth work for embankment and subgrade construction • The material used in embankment, sub-grade, shoulders, etc. shall be soil, gravel, a mixture of these or other material approved by an Engineer. It shall be free from logs, stumps, roots, rubbish, etc.

  6. Cut and Fill (Embankment) Sections

  7. Granular Subbase • Gravel material to be used for sub-base shall be obtained from approved sources in borrow areas, cuts or existing pavement layers. • The complete sub-base shall contain no material having a maximum dimension exceeding two-thirds of the completed layer thickness. • Gravel Sub-base material shall, unless otherwise stated, conform to specification requirements in terms of:

  8. Need for Testing and Specification • Material testing is essential to verify material characteristics for application trials, detect defects, analyze failures, improve new materials or conduct basic research. • The materials used in construction projects must meet strict quality regulations, standards, and service life requirements. • The materials will affect the quality, costs, sustainability and environmental impact of the construction project. 

  9. …. cont • The technical staff involved in testing areas should have educational certificate and work experience. • The Engineer shall verify that the laboratory has the appropriate equipment, calibration and verification records, test procedures, and trained personnel to perform every procedure in the proposed scope. • Test procedures shall be performed with applicable materials

  10. Contractor’s Responsibilities from the view of the provision of the Contract General Responsibilities • The Contractor has obligation with respect to the supply of materials and workmanship. • Do the work with care and skill in a proper and workmanlike manner; • Use materials of good and viable quality; • Ensure that both the work and the materials should reasonably fit for the purpose they are wished-for.

  11. …cont • Clause 8.1 The Contractor shall, with due care and diligence, execute and maintain the works and provide all labour, including the supervision thereof, materials. Construction plant and all other things, whether of a temporary or permanent nature, required. • Clause 36.1 All materials and workmanship shall be of the respective kinds described in the Contract and in accordance with the Engineer’s instructions, and shall be subjected from time to time to such tests as the Engineer may direct at the place of manufacture of fabrication, or on the site or at such other places as may be specified in the contract.

  12. …cont • Clause 36.2. All samples shall be supplied by the Contractor at his own cost if the supply thereof is clearly intended by or provided for in the contract. • Clause 36.3. The Cost of making any test shall be borne by the Contractor if such test is clearly intended by or provided for in the contract.

  13. Material Standards to be Met on Completion of Construction The Specification sets out materials standards to be met by each major construction material tested in the Site laboratory. • 1209 Specifications American, British and Ethiopian standards are used in this Technical Specification. In the absence of any definite provisions in the Specification on any particular issue, reference may be made to the latest codes of AASHTO, ASTM, BS or Ethiopian standards in this order of precedence.

  14. …cont 3202 MATERIALS FOR EMBANKMENTS a) Fill • The following soils are unsuitable for construction of embankments: • • Materials with more than 5% by weight of organic materials • • Materials with a swell of more than 3% • • Clays with plasticity index over 45 or a liquid limit over 90. b) Improved Subgrade • The following are minimum requirements for fill materials to be used in area of weak sub-grade: • • Minimum 25% passing 2.36 mm sieve. • • Ip less than 30. • • Reject index less than 10% • • Soils shall be non-expansive, non-dispersive and free from any deleterious matter.

  15. …cont SERIES 4000: CULVERT AND DRAINAGE WORKS • Concrete cube strength • aggregate • water 5102 Gravel Wearing Course • The minimum requirements for gravel wearing course material • Maximum size (mm) • Oversize Index (Io) • Shrinkage product (Sp) • Grading coefficient (Gc) • Soaked CBR (at 95% Mod AASHTO) • Treton Impact Value (%)

  16. Laboratory Testing • Basic testing requirements – Soils • Atterberg limits (LL, PL) • Linear shrinkage • Particle size distribution – grading • Moisture content and compaction • California Bearing Ratio (CBR)

  17. Unsuitable soil materials for subgrade • Clay soil which contains the value of Liquid Limit more than 80% and/or Plasticity Index more than 55%, • It is flammable materials (oily), and organically clay soil, • Contain lots of rotten roots, grass and other vegetation, • Soil which is soft and unstable because it is too wet or dry which makes it difficult to compact properly.

  18. Desirable Properties of Soil as Subgrade Material • Stability. • Incompressibility. • Minimum changes in volume and stability under adverse condition of weather and ground water. • Permanency of strength. • Good drainage. • Ease of compaction.

  19. Granular Subbase • Grading limits • Grading Modulus • Plastic Index, PI • Compaction requirements • CBR

  20. Gravel wearing surface • Based on • Shrinkage product (linear shrinkage) • Grading Coefficient

  21. Atterberg Limit Casagrande LL Device PL Device Plastic index PI = LL - PL

  22. Soil phases and Atterberg limits Water content increasing Dry soil Shrinkage limit Plastic limit Sticky limit Liquid limit Plastic index Volume increasing Shear strength decreasing (~170) (~1.7) 0 PL SL LL PI

  23. Particle Size Distribution

  24. Particle Size Distribution • Gradation • Poor/ Uniform • Well/ continuous • Gap graded If there are a lot of different fractions between the largest and the smallest, the sample is well graded. If only a few sizes can be seen, the sample is single sized or poorly graded. Single-sized materials do not compact well, because there are no suitably small-sized particles to fill the empty voids between the bigger particles a good mechanical interlock

  25. States of soil aggregate mixtures b) enough fines c) excess fines a) no fines Alemgena Alene, PhD CENG6305 – Ch2

  26. Purpose of soil classification

  27. Development of soil classification

  28. Basis of soil classification systems

  29. Key soil components in soil classification systems

  30. Extension of USCS for LVR

  31. Comparison AASHTO and USCS (Lia 1970)

  32. Comparison of soil classification systems

  33. Material Classes for Pavement formation

  34. ERA Testing Standards

  35. Differences in Test Methods

  36. Differences in Test Methods

  37. Differences in Test Procedure - CBR

  38. Rationale for Specification

  39. Specs and Use of Local Materials

  40. Appropriateness of current specs

  41. Use of local materials

  42. ERA Low Volume Roads • Material requirements for roadbase • A wide range of materials including • lateritic, • calcareous and quartzitic gravels, • river gravels and other transported and residual gravels, or • granular materials resulting from weathering of rocks can be used successfully as road base materials

  43. Particle size distribution for natural gravel base

  44. Concrete Test • Concrete grade shall be confirmed at least through strength test

  45. Field Compliance Tests • Field density – Sand cone replacement • Strength – Dynamic cone penetrometer

  46. Dynamic Cone Penetrometer (DCP) • How to do test • How to analyse data • How to calculate Structural Number

  47. Dynamic Cone Penetrometer

  48. 1. Kleyn and Van Heerden, 1983 (60° cone) 2. Smith and Pratt, 1983 (30° cone) 3. Van Vuuren, 1969 (30° cone) 4. TRRL, 1990 (60° cone) 100 50 CBR (per cent) 10 5 3 4 1 2 1 1 5 10 50 100 DCP (mm/blow) 1. Log10 (CBR) = 2.632 - 1.28 Log10 (mm/blow) 2. Log10 (CBR) = 2.555 - 1.145 Log10 (mm/blow) 3. Log10 (CBR) = 2.503 - 1.15 Log10 (mm/blow) 4. Log10 (CBR) = 2.48 - 1.057 Log10 (mm/blow) DCP - CBR RELATIONSHIP

  49. DCP TEST Site/road:Test No:Section No/Chainage:Direction:Wheel path: Date: Zero reading of DCP:Started test at: No.Blows No.Blows No.Blows mm mm mm Blows Blows Blows Alemgena Alene, PhD CENG6302 - Ch6

More Related