1 / 6

57th IETF Meeting - July 2003 - RMON Working Group

57th IETF Meeting - July 2003 - RMON Working Group. draft-stephan-ipv6-protocol-identifier-00.txt Emile Stephan/Jordi Palet. draft-stephan-ipv6-protocol-identifier-00.txt. Output of the 6QM project Protocol Identifiers defined in the draft Examples of usage in the IPPM REPORTING MIB

mika
Download Presentation

57th IETF Meeting - July 2003 - RMON Working Group

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 57th IETF Meeting - July 2003 - RMON Working Group draft-stephan-ipv6-protocol-identifier-00.txt Emile Stephan/Jordi Palet

  2. draft-stephan-ipv6-protocol-identifier-00.txt • Output of the 6QM project • Protocol Identifiers defined in the draft • Examples of usage in the IPPM REPORTING MIB • Protocol Identifiers to define

  3. Output of the 6QM* project • IPv6 protocol identifiers needs: • 1-point passive measurement (RMON MIB); • Need of IPv6 protocol identifiers to describe probe capabilities in protocolDirTable • 2-points active measurement (IPPM REPORTING MIB); • Need of IPv6 protocol identifiers for describing the Type of Packet exchanged. • RFC2330 TypeP is ‘implemented’ as a pair <TypeP, TypePaddress> • TypeP is a string made of dot separated protocol names. Sub IP protocol names should been previously defined using the macro PROTOCOL-IDENTIFIER of the RFC 2895. Higher protocol names derivate ‘automatically’ from the RFC 2895 framework. • TypePaddress is a string made of space separated parameters. • N-points spatial measurement; • Mix of active and passive measurement; * www.6qm.org

  4. Examples of usage in the IPPM MIB • Description of either the source or the destination of the measurement points: • IPv4 example : • The RFC2896 defines the protocol identifier ‘ip’ and ‘ipip4’. • The TypeP of one end of a tunnel of IP in IP <“ip.ipip4”, “192.168.1.1 128.2.6.7”>. • IPv6 example : • The RFC2896 defines the protocol identifier ‘udp’. This draft defines the protocol identifier ‘ip6’. • The TypeP of UDP over IPv6 is <"ip6.udp", “2001:688:1f9b:7654:3210:b3ff:feab:3456 3485">

  5. Protocol Identifiers defined • IPv6 • ip6 • ipip6 • icmp6 • SUB IP • mplsu • mplsm

  6. Protocol Identifiers to define • IPv4 protocol identifier need ? • SUB IP • mplsvpn • Stacked vlan • … • Discussion on the need / status of the draft…

More Related