1 / 13

Interrupts in the guest VM

Interrupts in the guest VM. A look at the steps needed to “reflect” hardware interrupts back into the ROM-BIOS for servicing . The VME-bit in CR4. Our VMX demo-program set the VME-bit (bit #0) in Guest’s Control Register CR4.

mili
Download Presentation

Interrupts in the guest VM

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Interrupts in the guest VM A look at the steps needed to “reflect” hardware interrupts back into the ROM-BIOS for servicing

  2. The VME-bit in CR4 • Our VMX demo-program set the VME-bit (bit #0) in Guest’s Control Register CR4 31 13 5 4 0 V M X E P A E P S E V M E Legend: VME (Virtual-8086 Extensions): 1=on, 0=off PSE (Page-Size Extensions): 1=on, 0=off PAE (Page-Address Extensions): 1=on, 0=off VMXE (Virtual Machine eXtensions Enabled): 1=yes, 0=no

  3. Virtual-8086 Mode Extensions • Software interrupt instructions (int $nn) will selectively be directed either to IDT-gates or to IVT-vectors, depending on a ‘bitmap’ located within the Task-State Descriptor • This ‘interrupt redirection bitmap’ has 256 bits (one for each 8-bit interrupt-number) • Its location within the TSS is immediately ahead of the I/O Permission Bitmap

  4. Interrupt-redirection Bitmap TSS base 25 longwords Legend: 1 = interrupt is directed to IDT 0 = interrupt is directed to IVT Interrupt-redirection Bitmap 256-bits ( = 32 longwords) 256 bits 65536 bits = ‘IOMAP’ field (at offset 0x66) I/O-Permission Bitmap 65536-bits ( = 8192 bytes) = interrupt-redirection bitmap = I/O-permission bitmap Task-State Segment

  5. Software INTs Only! • The interrupt-redirection bitmap does NOT affect any ‘hardware’ interrupts – they are serviced by the interrupt-handlers whose entry-points are specified within the gate-descriptors that comprise the IDT • How can the Guest VM in our VMX demo-program handle the ‘hardware’ interrupts generated by the peripheral devices?

  6. We’ll modify our VMX demo • One change to ‘vmxstep3.s’: guest_RFLAGS: 0x00023202 # IF=1, IOPL=3 • One change to ‘vmxdemo.s’: in $0x21, %al # get master-PIC’s mask or $0x10, %al # mask UART interrupt out %al, $0x21 # set master-PIC’s mask

  7. Modify ‘guest_isrGPF’ • We introduce a major modification into the guest’s General Protection Fault-handler, to “reflect” external device-interrupts back to ‘real-mode’ code in the ROM-BIOS that will be executed in ‘Virtual-8086 mode’ • The steps needed to do this are based on ‘emulating’ the CPU’s usual response to an external interrupt in 8086 real-mode

  8. CPU’s interrupt-response • Push FLAGS register onto the stack • Clear IF and TF bits in FLAGS register • Push CS and IP registers onto the stack • Acquire the device’s interrupt-ID number • Lookup that ID-number’s interrupt-vector • Put that vector’s ‘loword’ into IP register • Put that vector’s ‘hiword’ into CS register • Then resume CPU’s fetch-execute cycle

  9. EFLAGS 31 21 20 19 18 17 16 14 13 12 11 10 9 8 7 6 4 2 0 I D V I P V I F A C V M R F 0 N T I/O PL O F D F I F T F S F Z F 0 A F 0 P F 1 C F IF (Interrupt-Flag): 1=on, 0=off VM (Virtual-8086 Mode): 1=on, 0=off IOPL (Input/Output Permission-Level): =00 (only ring0 can execute ‘in’ and ’out’) =01 (ring0 and ring1 can execute ‘in’ and ‘out’) =10 (ring0, ring1, ring2 can execute ‘in’ and ‘out’) =11 (ring0, ring1, ring2, ring3 can execute ‘in’ and ‘out’) NOTE: Virtual-8086 mode operates at the ‘ring3’ privilege-level

  10. PIC masks • Each Programmable Interrupt Controller has a ‘mask register’ that allows blocking of the interrupts from specific devices I R Q 7 I R Q 6 I R Q 5 I R Q 4 I R Q 3 I R Q 2 I R Q 1 I R Q 0 Master-PIC mask-register I/O Port 0x21 I R Q F I R Q E I R Q D I R Q C I R Q B I R Q A I R Q 9 I R Q 8 I/O Port 0xA1 Slave-PIC mask-register

  11. GPF stack-frame GS ? FS ? DS ? ES ? SS ? SS:SP (before) SP FLAGS EFLAGS CS CS IP SS:SP (after) IP ring3 stack SS0:ESP0 error ring0 stack

  12. GPF error-code 15 \3 2 1 0 selector-index T I I N T E X T Legend: EXT (External-event): 1=yes, 0=no INT (Interrupt-table): 1=yes, 0=no TI (Table-Indicator): 1=LDT, 0=GDT Index = Table’s element-number

  13. GPF stack-frame Interrupt Vector Table GS hiword loword FS hiword loword hiword loword DS hiword loword ES hiword loword SS hiword loword SP hiword loword hiword loword EFLAGS hiword loword CS hiword loword IP hiword loword SS0:ESP0 error hiword loword hiword loword ring0 stack hiword loword hiword loword

More Related