1 / 3

OSEOTITE 3i SLA ITI STRAUMANN RBS RENEW BIOCARE

RENEW BIOCARE RBS ™. RESORBABLE BIOMATERIAL BLASTED SURFACE. TM. OSEOTITE 3i SLA ITI STRAUMANN RBS RENEW BIOCARE. Surface Roughness Measurements Surface Preparation Roughness (  m.) Control 1.32 ± 0.20 Glass Bead 0.73 ± 0.25

mina
Download Presentation

OSEOTITE 3i SLA ITI STRAUMANN RBS RENEW BIOCARE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. RENEW BIOCARE RBS™ RESORBABLE BIOMATERIAL BLASTED SURFACE TM OSEOTITE 3i SLA ITI STRAUMANN RBS RENEW BIOCARE Surface Roughness Measurements Surface PreparationRoughness (m.) Control 1.32 ± 0.20 Glass Bead 0.73 ± 0.25 Acid Etch 1.17 ± 0.27 100 mesh Al2O3 2.14 ± 0.48 RBS 3.09 ± 0.48 TM

  2. Renew Biocare RBS Process RBS surface 2000x • The Renew Biocare RBS Process bigins with a traditional machined implant fixture. • The implant is then basted with calcium phosphate ceramic. • After blasting, the implant is passivated (in accordancd with established standards, • (ASTM F-86) to completely remove residiual media. • This passivation is not an acid-etch procedure and does not affect fatique strenght • of the implant by attacking the titanium. • RBS media has the added benefit of a biocompatible material that is easily removed • from the surface during the passivation process.

  3. COMPARING OTHER SURFACES TO RENEW BIOCARE RBS™ MACHINED ACID ETCHED (3i) AL2 O3 BLASTED (SLA) Renew Biocare RBS™ (β-TCP)

More Related