E N D
1. Stratix V 28G Transceiver – Live Demo
2. Outline Altera University Program
Stratix V Transceiver Introduction
100G in Stratix V
Stratix V SI Kit
Demo Design
Demo
2
3. Altera University Program 3
4. NetFPGA on DE4 4
5. NetFPGA on DE4 5
6. Stratix V FPGAs – Built for Bandwidth
7. Stratix V Device Family Variants Stratix V GT variant
28 Gbps for high-performance, ultra-high bandwidth applications
Stratix V GX variant
Up to 66 transceivers at 14.1 Gbps for high performance, high bandwidth
Stratix V GS variant
Optimized for high-performance, high-precision DSP applications with transceivers up to 14.1 Gbps
Stratix V E variant
For highest density, high-performance applications
8. Designed for Backplanes and Optical Modules Drive 40” backplanes at 14.1 Gbps
10GBASE-KR compliant (IEEE 802.3AP Clause 72)
Interface to optical modules directly
Built-in electronic dispersion compensation (EDC)
XFP, SFP+, QSFP, and CFP compliance
Signal conditioning
Pre-emphasis and de-emphasis
Four-stage continuous time linear equalizer (CTLE)
5-tap decision feedback equalizer (DFE)
Adaptive dispersion compensation engine (ADCE)
On-die instrumentation
Monitor eye margin within the receiver
Evaluate effectiveness of signal-conditioning techniques
Generate post-equalized eye contour
9. Flexible Transceiver Architecture Scalability and flexibility through a continuous bank of transceivers
Complete PMA+PCS per channel
Flexible clocking options with abundant transmit clock sources enabling up to 44independent data rates
10. 100G Solution in Stratix V – Line Card 10
11. Pin Migration Stratix V GT to Stratix V GX 11
12. Stratix V GT Si Kit 12
13. Board Block Diagram 13
14. Demo - Stratix V GT Design Block Diagram 14 Control/status signals routed from/to ISSnP
SignalTap used for observation of other data/status signals
15. Changing PRBS Pattern 15
16. 4 Channel Design Each channel has its own PRBS generator and verifier
All of them in serial loopback
PMA signal conditioning parameters set for serial loopback
Running at 25G
ATX PLL
16
17. PRBS 7–Error Count For 4 25G Channels 17
18. PRBS 31–Error Count For 4 25G Channels 18
19. SignalTap for ATT channel 0 – showing TX and RX 19
21. Backup
22. 22
23. Serial Loopback 23