150 likes | 167 Views
Status and future plans for the CMS 10x10 GEM prototype. Time Measurement CMS GEM 10X10 S curve. S-curve step function fit. S-curves without CP. Time Measurement CMS GEM 10X10. Ed = 2.9kV/cm Et1 = 3.7kV/cm Et2 = 3.7kV/cm Ei = 3.7kV/cm Vgem1 = 415V Vgem2 = 380V Vgem3 = 335V
E N D
Time Measurement CMS GEM 10X10 Ed = 2.9kV/cm Et1 = 3.7kV/cm Et2 = 3.7kV/cm Ei = 3.7kV/cm Vgem1 = 415V Vgem2 = 380V Vgem3 = 335V VFAT Threshold 80
Time Measurement CMS GEM 10X10 Zoom image Ed = 2.9kV/cm Et1 = 3.7kV/cm Et2 = 3.7kV/cm Ei = 3.7kV/cm Vgem1 = 415V Vgem2 = 380V Vgem3 = 335V VFAT Threshold 80
Time Measurement CMS GEM 10X10 Ed = 2.9kV/cm Et1 = 3.7kV/cm Et2 = 3.7kV/cm Ei = 3.7kV/cm Vgem1 = 415V Vgem2 = 380V Vgem3 = 335V VFAT Threshold 80 Time [ns]
Time Measurement CMS GEM 10X10 Ed = 2.9kV/cm Et1 = 3.7kV/cm Et2 = 3.7kV/cm Ei = 3.7kV/cm Vgem1 = 415V Vgem2 = 380V Vgem3 = 335V VFAT Threshold 30
To do • S-curve before each run? • Runs with very small threshold • Improve the efficiency • The LHCb Power supply cannot go more then 3.6kV/cm On the Ei and ET1, ET2. Ed max is 3.4kV
Honeycomb GEMI/V plot Measured currents with one HV filter in the chain
Honeycomb GEM discharge studies • The discharge went trough all GEMs. • Need to replace them with new ones. • Measure the HV currents of the “broken” ones