1 / 25

Marc GEORGES, Centre Spatial de Liège

High Resolution Dynamic Holography with Photorefractive Crystals : Principles and Applications to Vibrations Measurement. Marc GEORGES, Centre Spatial de Liège. Holographic Interferometry. Full-field, non-contact technique Displacements measurement : 10 nm - 25 microns (one shot)

morton
Download Presentation

Marc GEORGES, Centre Spatial de Liège

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. High Resolution Dynamic Holographywith Photorefractive Crystals :Principles and Applications to Vibrations Measurement Marc GEORGES, Centre Spatial de Liège

  2. Holographic Interferometry • Full-field, non-contact technique • Displacements measurement : 10 nm - 25 microns (one shot) • Higher resolution compared to Speckle-based • Needs of potential user • Easy to set up • Quantified data, easy to interprete • Transportable/portable, compact, robust, flexible, … • Configuration adaptable • Cheap, low consumption

  3. I(x,y)=I0(x,y) [1+m(x,y) cos(Df(x,y))] Holographic Interferometry • Real-time Holographic Interferometry Interferogram

  4. Holographic Interferometry • Critical segment for applicability : Holographic medium • Fast • Homogeneous (optical quality) • Processable in-situ • Erasable, reversible • Low diffusion noise (high signal-noise ratio) • No or fewest operations possible for obtaining information

  5. Photorefractive crystals 1.Fringe pattern created by interference between 2 waves 2.Charges generated byphoto-excitation in illuminated area, migrate and are trapped in dark area Local space charge field created between dark and illuminated area

  6. Photorefractive crystals 3. Electro-optic effect (Pockels) Refractive index n is modulated by space-charge field Recording of a volumic refractive index grating (thick hologram) 4. Processus is dynamic and reversible In-situ recording Erasure possible = Re-recording

  7. Dn = Dnsat (1-exp(-t/t)) Photorefractive crystals • Crystal families • Sillenites : Bi12SiO20 (BSO), Bi12GeO20 (BGO), Bi12TiO20 (BTO) • Ferroelectrics : LiNbO3, BaTiO3, KNbO3, KTN, SBN,… • Semiconductors : CdTe, ZnTe, AsGa, InP,… • Figures of merit • Recording energy at saturation : Es = t.I • Diffraction efficiency : h = Idiff/Iref ~ (Dn)2

  8. Photorefractive crystals • Particular properties : depend on crystal cut Anisotropic diffraction Isotropic diffraction Interferogram contrast depends on the analyser orientation Interferogram contrast depends on the product : -coupling constant -crystal thickness

  9. Photorefractive crystals • Sillenites : BSO - BGO - BTO Sensitive in blue-green, red with dopants ES ~ 1-10 mJ/cm2, h~ 0.1 %, G~ 0.5 cm-1 • Ferroelectrics : LiNbO3 - KNbO3 - BaTiO3 - SBN ... Sensitive blue-green, red-near IR with dopants ES ~ 1-10 J/cm2, h~ 100 %, G ~ 1 - 40 cm-1 • Semiconductors : CdTe - ZnTe - CdZnTe .… Sensitive in near IR ES ~ 0.1-1 mJ/cm2, h~ 1 %, G ~ 0.5 cm-1

  10. Cw Holographic Camera • Developed by CSL : 1993-1998 • Optical head : L=25 cm, diam=8 cm 1 kg • Laser : DPSS, VERDI 5W • Laser light brought by optical fiber • Specialty fiber developed (5 m, Transmission 80%, 5W injected) • Mobile rack including • laser + power supply • camera, piezo,.. electronic controls

  11. Cw Holographic Camera • Applications : static measurements • NDT (defect detection) : impacts-delamination in CFRP Interferogram obtained after thermal stimulation (40X55 cm2) Calculated phase image Unwrapped image with vertical differentiation • NDT (defect detection) : lack of soldering in flat cables (10 x 5 cm2)

  12. Cw Holographic Camera • Displacement metrology : • calibration of piezoelectric sheets (40x25 cm2) • sensor-actuators for smart structure control • High fringe density

  13. Cw Holographic Camera • Displacement metrology : • Determination of CTE of carbon fiber rods or assemblies • Observe top of object and baseplate • After DT : Measure difference of displacements betw. • top of object : piston effect • baseplate : piston effect

  14. Frequency scan Acquisition Cw Holographic Camera • Acousto-optic shutter synchronized with sinusoidal excitation • Open at maximum object displacement • Displacement btw. average & maximum positions • Duty cycle : 0.15 - 0.2 • Compromise between fringe contrast - image intensity • Applications : Stroboscopic Real-Time

  15. Stroboscopic system • Applications • Academic demonstration : Metallic plate excited with loudspeaker (M. Georges, Ph. Lemaire, Optics Comm. 98) • Recent tests (by Optrion) : Compressor blades for new aircraft engine • Certification predicted resonance frequencies and mode shapes • Several modes found were not predicted

  16. Positive • High quality results • Convenient for mode shape visualization • Convenient for comparison with predicted frequencies / mode shapes • Userfriendly device, indefinitely reusable • Limits : • Displacements : from 15-20 nm to 30 microns • Stroboscope • loss of light (80 % with 0.2 duty cycle) • small objects (25x25 cm2) with 500 mW laser

  17. Pulsed system • Motivations • Luminous Energy concentrated over a few nanoseconds • One can deal with perturbed environment • No more illumination constraints at the readout step (like in the case of stroboscopic readout with cw laser) • 2 pulses with variable delay • High vibration amplitudes • Fast transient events

  18. Pulsed system • First works • LCFIO (group of G. Roosen-G. Pauliat) • Labrunie et al., Opt. Lett. 20 (1995) • Labrunie et al., PR ’95 • Labrunie et al., Opt. Comm. 140 (1997) • Ruby Laser at 694 nm PR crystal weak sensitivity BSO - BGO 488 - 514 - 532 nm New crystal BGO:Cu (J-C. Launay, ICMCB Bordeaux) • Quality of results (vibration mode of turbine blade) was average, tough acceptable

  19. Pulsed system • New developments since 1998 (CSL and LCFIO) • Use Q-switch YAG laser (COHERENT Infinity) frequency doubled : 532 nm (adapted to sillenite crystals) pulses : 3 ns energies : 0 to 400 mJ/pulse repetition rate : 0,1 to 30 Hz • Additional equipment for energy balance between pulses • Application in vibration measurement

  20. Pulsed system • Pulse 1 : all energy used for the recording • Pulse 2 : readout • decrease Eobj to avoid CCD blooming • decrease Eref to not erase the hologram • Phase f measurement : • Cam 1 : I = I01 (1+m sin f) • Cam 2 : I = I02 (1+m cos f)

  21. Vibrations • 4 pulses technique

  22. In practice • Laser : 1 pulse 30 Hz max • High frequencies : Use several cycles at a given frequency w • Results : • Object : Aluminium plate clamped on one edge • Excitation : Loudspeaker • Frequency range : 20-380 Hz Interferograms serie example 359-365 Hz

  23. Amplitude of the frequency response in 2 points

  24. Conclusion - Future prospects • Present : PHIFE « Pulsed Holographic Interferometer for analysis of Fast Events » • Development of holographic heads • Improvement of existing ones (new crystal configuration/properties) • different wavelengths • Development of double-pulse laser (INNOLAS) • YAG Q-switched • 25 Hz, 8 nsec, 800 mJ (1064 nm) • delay : up to 0.1 ms • Applications in industrial cases (vibrations, transient events, aerodynamics)

More Related