1 / 8

V80 Analyzing Training

V80 Analyzing Training. Gopi - Logic. – 9.15am Budi - Camera - 9.30am Gary - Blue-tooth , Rotator - 10am Lee Ming - RX. 10.30am David - TX. 11am Leng - PM/P-Flex/Keypad 11.30am Pang - Audio 12pm AOB - 12.30pm. V80 Logic. Decoder IC, not used For V80. 26MHz Crystal. CKO = 52MHz

mostyn
Download Presentation

V80 Analyzing Training

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. V80 Analyzing Training • Gopi - Logic. – 9.15am • Budi - Camera - 9.30am • Gary - Blue-tooth , Rotator - 10am • Lee Ming - RX. 10.30am • David - TX. 11am • Leng - PM/P-Flex/Keypad 11.30am • Pang - Audio 12pm • AOB - 12.30pm Motorola Confidential Proprietary

  2. V80 Logic Decoder IC, not used For V80 26MHz Crystal CKO = 52MHz Testpoint PSRAM Mode Resistor Neptune powersupply Pins/bypass caps Motorola Confidential Proprietary

  3. V80 Memory U700 C702, C703, C700,C701 Power supply bypass caps. Vbuck = 1.87V High voltage programming test point. Can be used to check if the flash is getting power Flash and PSRAM in a single chip Flash Memory Size: 256Mbit (24 address lines) PSRAM Memory Size: 64Mbit (22 address lines) Two suppliers: Intel and STM R897 PSRAM Mode Resistor. Without this resistor, phone will not turn on Motorola Confidential Proprietary

  4. Neptune Voltages Motorola Confidential Proprietary

  5. CKO Capture Motorola Confidential Proprietary

  6. Neptune STANDBY Level shifter IC U801 – Level shifter IC Purpose: Shift the the input voltage of 1.575V to an output voltage of 2.775V. Neptune outputs the “STANDBY” signal to PCAP. 1.575V 2.775V 2.775V Motorola Confidential Proprietary

  7. V80 Testpoints Short IO_REG and WDOG testpoints for No power up failure troubleshoot 2.775V Good Phone Without shorting WDOG and IO_REG, WDOG must be at 2.775V at all times Motorola Confidential Proprietary

  8. Troubleshooting Tips • The radio draws 40mA to 60mA of current when the flash is blank (empty flash/ not programmed) • A bricked phone will draw more current than a blank flash phone • When a phone bricks and if the IMEI is not programmed, you can save the phone by using the erase_rom.shx file • If IMEI is already programmed and phone bricks, replace the flash with a empty flash • Place a short between WDOG and IO_REG before starting a No power up troubleshooting Motorola Confidential Proprietary

More Related