1 / 8

Collimators Material Damage Study

Collimators Material Damage Study. Previous results In our group - Adriana Bungau’s thesis - heat deposition on collimator from several bunches studied using Merlin code including scattering; 22 bunches melts Ti collimator without scattering; less critical with scattering included

mya
Download Presentation

Collimators Material Damage Study

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Collimators Material Damage Study Previous results In our group - Adriana Bungau’s thesis - heat deposition on collimator from several bunches studied using Merlin code including scattering; 22 bunches melts Ti collimator without scattering; less critical with scattering included Beam Dump investigations - similar approach for different materials (C/Cu/H2O/Ar? – Cu/Ti/Be) they are not limited in material but probably have additional safety issues, we are limited but avoid shower damage in thin spoilers Two types of possible Collimators Energy Deposition sources- Ionization + electromagnetic shower: single particle models studied quite well by codes MARS, GEANT4, FLUKA … - Image current heating: important near wall effect (X.E.Lin, D.H.Whittum) G.Kurevlev - Daresbury meeting 3.11.5

  2. Collimators Material Damage Study All the possible heat deposition sources guide to instant temperature rise which can be solved by integration of the specific heat equation. Heat transfer equation can be solved separately then to get real time dependant temperature distribution between bunches. For metals we need to use all the parameters with real dependency of temperature. The results of analytical models need to be compared with simulations. ANSYS simulation can be really useful here as it can include phase transformations or melting and possible cracks of material. G.Kurevlev - Daresbury meeting 3.11.5

  3. Collimators Material Damage Study Ionization (approximations used for analytical study) Main source of heating – ionization with possible correction factor due to electromagnetic shower (1.4 - 2.5) Additional information needed for thick structures but not critical for L<1X0 -> we can apply 2D models We can assume instant temperature rise due to a short bunch length in comparison with the heat diffusion Then we can get the temperature rise per bunch by integration G.Kurevlev - Daresbury meeting 3.11.5

  4. Collimators Material Damage Study Heat transfer should be solved using Temperature rise limits: Temperature should be far enough from melting Induced thermal stress should be far enough from leading to cracks and damage G.Kurevlev - Daresbury meeting 3.11.5

  5. Collimators Material Damage Study Our approach to ANSYS simulation 2D geometry as we really can ignore longitudinal shower distribution for electrons in relatively thin collimators. Two test with energy generation command HGEN below. G.Kurevlev - Daresbury meeting 3.11.5

  6. Collimators Material Damage Study G.Kurevlev - Daresbury meeting 3.11.5

  7. Collimators Material Damage Study G.Kurevlev - Daresbury meeting 3.11.5

  8. Collimators Material Damage Study Future plan - macro to create ANSYS keypoints that can reflect 2D bunch charge distribution to automatically repro distribution of a real bunch; transient solution with a bunch current converted into time dependant energy deposition. G.Kurevlev - Daresbury meeting 3.11.5

More Related