1 / 5

Non-Spin Deployment Criteria

Non-Spin Deployment Criteria. QMWG April 9, 2012. Current Deployment Criteria. Deploy half available Non-Spin when: (HDL – Gen) ≤ 200 MW during normal load ramps AND (HASL – Gen) – (30-minute load ramp) < 1000 MW Deploy all available Non-Spin when:

myrrh
Download Presentation

Non-Spin Deployment Criteria

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Non-Spin Deployment Criteria QMWG April 9, 2012

  2. Current Deployment Criteria Deploy half available Non-Spin when: (HDL – Gen) ≤ 200 MW during normal load ramps AND (HASL – Gen) – (30-minute load ramp) < 1000 MW Deploy all available Non-Spin when: (HDL – Gen) ≤ 200 MW during normal load ramps AND (HASL – Gen) – (30-minute load ramp) < 500 MW or PRC < 2500 MW Recall half of deployed Non-Spin when: (HDL-Gen) ≥ 500 MW AND (HASL – Gen) – (30-minute load ramp) > 1000 AND PRC > 2800 MW Recall all of deployed Non-Spin when: (HDL-Gen) ≥ 1000 MW AND (HASL – Gen) – (30-minute load ramp) > 1000 AND PRC > 3000 MW

  3. Manual Non-Spin Quantity Availability Prior to NPRR426, both On-line and Off-line Resources were available for manual Non-Spin deployment: ~ 1800-2000 MW After NPRR426 (implemented 1/5/2012), On-line Resources were available for automatic SCED deployment: ~1200 MW and Off-line Resources were available for manual Non-Spin deployment: ~ 800 MW After revision to “Methodologies for Determining Ancillary Service Requirements” (implemented 4/1/2012), Non-Spin requirement dropped to ~ 1300-1500 MW; however, Off-line Resources available for manual Non-Spin deployment relatively unchanged: ~ 800-1000 MW *Calculation of Non-Spin availability computed by summing telemetered Non-Spin Responsibility of Off-line Resources

  4. Proposed Deployment Criteria Deploy half available Non-Spin when: (HDL – Gen) ≤ 200 MW during normal load ramps AND (HASL – Gen) – (30-minute load ramp) < 1000 0 MW Deploy all available Non-Spin when: (HDL – Gen) ≤ 200 MW during normal load ramps AND (HASL – Gen) – (30-minute load ramp) < 500 -300 MW or PRC < 2500 MW Recall half of deployed Non-Spin when: (HDL-Gen) ≥ 500 MW AND (HASL – Gen) – (30-minute load ramp) > 1000 AND PRC > 2800 MW Recall all of deployed Non-Spin when: (HDL-Gen) ≥ 1000 MW AND (HASL – Gen) – (30-minute load ramp) > 1000 AND PRC > 3000 MW

  5. Unchanged Deployment Criteria If the North-to-Houston (N_H) Voltage Stability Limit Reliability Margin≤ 300 MW, deploy Non-Spin (all or partial) Non-Spin in the Houston area as needed to restore reliability margin. If Non-Spin has been deployed in the Houston area to help manage the N_H Voltage Stability Limit, the deployments will be recalled once reliability margins have been restored to a manageable level.

More Related