1 / 13

NERI TORCH TRAINING PART VII PRACTICAL EXAM PREPARATION

NERI TORCH TRAINING PART VII PRACTICAL EXAM PREPARATION. HANDS ON EXERCISES. Each student must successfully pass the hands-on skills demonstration, which involves: Pre-job planning Proper torch assembly Safe work practices Shutting down a torch Fire Watch. HANDS ON EXERCISES.

nadine-morse
Download Presentation

NERI TORCH TRAINING PART VII PRACTICAL EXAM PREPARATION

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. NERI TORCH TRAINING PART VII PRACTICAL EXAM PREPARATION

  2. HANDS ON EXERCISES • Each student must successfully pass the hands-on skills demonstration, which involves: • Pre-job planning • Proper torch assembly • Safe work practices • Shutting down a torch • Fire Watch

  3. HANDS ON EXERCISES • Students shall work in pairs to complete seven hands-on exercises: • Pre-Job Planning • Starting a new roll at a wall using torch and flop • Install a target patch using torch and flop • Install a roll over a pipe vent using torch & flop • Flash a curb using torch and flop • Flash a curb using small detail torch • Shut down torch properly

  4. Hands-on Exercises

  5. #1 Pre-Job Planning

  6. Assembling Roofing Torches ASSEMBLY REVIEW Connect regulator to hose; Connect regulator to cylinder; Release a small amount of gas to remove any debris that may have been accumulating in the hose while in storage; Attach the hose to the torch head; With torch head closed, crack valve on cylinder to permit a small amount of pressure to build up in hose; Using soap/water solution, check all connections for bubbles which would indicate a leak is present; Close the valve on the cylinder before retightening all of the connections.

  7. #2 Starting a New Roll at the Wall

  8. #3 Installing a Target Patch Over Drain

  9. #4 Installing a Roll Over a Pipe Vent

  10. #5 Flashing Around a Curb – Torch and Flop

  11. #6 Flashing Around a Curb – Small Detail Torch

  12. #7 Shutting Down the Torch

  13. PROCEED OUTSIDE FOR PRACTICAL EXAMINATION

More Related