1 / 3

F1-Z Super Charger Turbine

F1-Z Super Charger Turbine. F1-Z Super Charger Turbine. F1-Z Turbo Supercharger Turbine (Performance Force Flow Turbine Fuel Saver) TK T101

naida-giles
Download Presentation

F1-Z Super Charger Turbine

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. F1-Z Super Charger Turbine F1-Z Super Charger Turbine

  2. F1-Z Turbo Supercharger Turbine (Performance Force Flow Turbine Fuel Saver) TK T101 The impellor of the Force Flow Turbine spins with the engines speed generating a maximum force to create a more powerful airflow into the combustion chamber. The increased airflow into the combustion chamber results in better atomized burning of fuel, increase in Horse Power and saving on fuel. Compare our system to other fuel savers on the market. Ours atomizes and pressurizes airflow by a dynamic quality ball bearing type spinning impellor, it is not a cheap fancy folded piece of sheet aluminum that doesn't spin! About Force Flow Fuel Saver:- Boosts engine horsepower and torque. - Extremely safe and economical. - Easy installation. - Reduction in waste gases, reducing pollution. - Cheaper and more effective than other static type fuel savers. - Fits to 99% of car intake systems , comes with - Adapter rings for larger intakes. - Reduces fuel usage by between 11% and 27%. With today's Out Of Control fuel prices, how could you afford not to have a fuel saver device installed? Installation is as simple as this! 1. Remove air inlet hose located between air filter and throttle. 2. Install Turbine Fuel saver inside the air inlet hose. Make sure the turbine facing out/ 3. If the Force Flow Turbine unit is smaller than your cars air inlet hose, Use the rubber ring attached to the size of air inlet hose then place in. 4. You may use double sided tape to make it strong hold/fit in the hose. 5. Tie with cable tie from outside of the F1-Z so it wont move after installing. (only turbine spin). 6. Replace/reinstall air intake pipe as original, make sure all the fittings are fit as normal. 7. You are now ready to go! You will now save on fuel money. outside diameter64.4mm length49mm. Price: RM180 Postage: RM10 Call: 016-4831769

More Related