170 likes | 338 Views
A Passive Approach to Rogue Access Point Detection. IEEE GLOBECOM 2007 Lanier Watkins Raheem Beyah Cherita Corbett 20083150 김진석. Introduction Related Works Main Idea Experiment and Result Conclusion Discussion. Contents. Rogue AP? Unauthorized AP Produces Security Vulnerabilities
E N D
A Passive Approach toRogue Access Point Detection IEEE GLOBECOM 2007 Lanier Watkins RaheemBeyah CheritaCorbett 20083150 김진석
Introduction • Related Works • Main Idea • Experiment and Result • Conclusion • Discussion Contents
Rogue AP? • Unauthorized AP • Produces Security Vulnerabilities • Unmonitored Point of Entry (to Private Network) • Detection • Difficult to Detect • Hidden AP (Location and No Broadcasting) • No Information from Rogue AP and Offender Instruction
RTT? • Round Trip Time • Time Between Sending Packet and Receiving Response • Related Works • Optimization of Protocol for Link Characteristic • RTT in QoS Issue Instruction
Wireless vs. Wired • Active vs. Passive • Wired and Passive Approach! Related Works
Wireless vs. Wired • Wireless : Using APs, Sensors, Walking the Halls.. • Time/Cost Consuming • Detection Time is Limited • Frequency Problem • Sensing Range • Disable the SSID Broadcasting • Low Signal Strength / Directional Antenna Related Works
Active vs. Passive • Active : Using Queries, New Packets • Network Load Increased • Rogue APs can Ignore Queries • Passive : MAC Address, Using Ack-pairs.. • MAC Address can be spoofed/cloned • Converging time -> In In-line Deployment? Related Works
Total delay = dprop + dtrans + dproc + dqueue • Total delay = dtrans = packetsize / capacity • Same Higher-layer Protocol (TCP/IP) • dtrans-> Characteristic of Physical-Layer Main Idea
Very Simple Testbed • No Other Traffic • Using Same Laptops for Node Experiment
Wireless nodes have greater RTT • RTT and Authorized AP Information • (Capacity)Wired >> Wireless • Result of DCF, Using Variation • Wired/Passive! Conclusion
Limited to TCP/IP (Other Protocols?) • Simple Test Bed -> Complex Network • Computational Capacity of Nodes • Assumption : Wired >> Wireless = True? Discussion