1 / 4

Windows Has Detected An IP Address Conflict In Windows 10 (Resolved)

If you are facing “Windows has detected an IP address conflict” error in Windows 10, this article will teach you how to fix.

namct0301
Download Presentation

Windows Has Detected An IP Address Conflict In Windows 10 (Resolved)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. FIX: Windows Has Detected An IP Address Conflict In Windows 10

  2. METHOD 1. RELEASE AND REFRESH IP ADDRESS • Renew or release the IP address by performing these following steps: • Step 1. Press Windows Key + X and select Command Prompt (Admin). • Step 2. After you open the Command Prompt, type the following commands and hit Enter after each: • ipconfig /release • ipconfig /flushdns • ipconfig /renew • Step 3. Wait until the command has finished, restart your system and check the problem still persists.

  3. METHOD 2. REMOVE STATICALLY ASSIGNED IP ADDRESS • Step 1. Press Windows Key + R then type ncpa.cpl in run dialog box and click OK. • Step 2. When Network Connections window opens, right click on your primary network adapter and click Properties. • Step 3. Then, on the property sheet, at Networking tab, choose Internet Protocol Version 4 (TCP/IPv4) and click Properties. • Step 4. From TCP/IPv4 property sheet, at General tab, make sure that Obtain an IP address automatically and Obtain DNS server address automatically are selected. • Step 5. Restart your computer then check the problem has resolved.

  4. METHOD 3. RESTART YOUR ROUTER • If you are on a Home network, turn off your router, wait for 1-2 minutes, and then power it on again and check if you still get message • Source: https://windowsfreeapps.com/windows-has-detected-an-ip-address-conflict-windows-10/

More Related