1 / 10

UNEQUALED TECHNOLOGY UNSURPASSED PERFORMANCE

Experience the exceptional pultrusion process with 2”x.¼” Flat Plate using Iso-Polyester Resin at Avtec Industries. Our products start with a flame and exceed industry standards with a torch reaching 2500°F in just 40 seconds. Witness the highly saturated resin flashing off the surface, emitting a reflective and emissive glow. Throughout a 5-minute test, there is no smoke, with the structure remaining fully intact. Explore the cutting-edge technology and unsurpassed performance at Avtec Industries now.

napolitano
Download Presentation

UNEQUALED TECHNOLOGY UNSURPASSED PERFORMANCE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. UNEQUALED TECHNOLOGY UNSURPASSED PERFORMANCE 9 Kane Industrial Drive Hudson, MA 01749 Phone: 978 562-2300 FAX: 978 562-8900 WWW.AVTECINDUSTRIES.COM

  2. Pultrusion 2”x ¼” Flat Plate, Iso-Polyester Resin

  3. Start Flame w/ 2500°F Torch

  4. 40 sec- Highly saturated resin flashes off surface NOTE: no smoke

  5. 45 sec- reflective and emissive glow of surface barrier can be seen NOTE: no smoke

  6. 3 min- NOTE: no smoke

  7. 5 min No change No smoke

  8. Test Concluded at 5 min 30 sec Structure is fully intact

  9. Conclusion, close up

  10. Conclusion, close up

More Related