1 / 21

HMI Interface for Breakers on AMPS

HMI Interface for Breakers on AMPS. Mahipathi Reddy Appannagari Nik Urlaub Client: Brian K. Johnson BEL G10, UI. Overview. Project Summary Analog Model Power System(AMPS) Clearview Software Human Machine Interface(HMI) OPC standard Communications Results Future Work.

natan
Download Presentation

HMI Interface for Breakers on AMPS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. HMI Interface for Breakers on AMPS • Mahipathi Reddy Appannagari • NikUrlaub • Client: Brian K. Johnson • BEL G10, UI

  2. Overview • Project Summary • Analog Model Power System(AMPS) • Clearview Software • Human Machine Interface(HMI) • OPC standard • Communications • Results • Future Work

  3. Project Summary • The scope of the ECE 504 project is to develop an HMI interface for the breakers of the model power system in protection lab in G10 BEL • The original project was to develop an HMI interface for breakers and to synch laboratory generator with the MPS remotely.

  4. Analog Model Power System(AMPS) • It is a small scale model of part of the power system • It consists of two parallel line that are each broken into two segments with a source at each end of the line • Here it is primarily used as an educational tool to each protective relaying

  5. Analog Model Power System(AMPS) Model set-up

  6. SEL Relay Rack

  7. ClearView software • Developed by Relab software • Is a tool box for developing SCADA interfaces • Uses a Client-Sever Architecture • Has built capability to communicate with SEL relays

  8. Human Machine Interface (HMI) ClearView Client

  9. Human Machine Interface (HMI) • Developed using the ClearView 7.6.1 software • HMI consists of a Client and a Server • Server uses OPC standard • ReLab OPC isused to get data from SEL-2030

  10. Human Machine Interface (HMI) SEL-2505

  11. Human Machine Interface (HMI) SEL-2030

  12. Human Machine Interface (HMI) • Screens are updated every 1 sec • Breakers are controlled by the SEL-2505 SEL-2505 IN1 OUT1 IN2 OUT2 IN3 OUT3 IN4 OUT4 IN5 OUT5 IN6 OUT6 IN7 OUT7 IN8 OUT8 Ph A Status 3PT Ph A TRIP Ph B Status Ph B TRIP Ph C Status Ph C TRIP RECLOSE

  13. Human Machine Interface (HMI) • SEL-2030 gets the breaker status from the relays • Breakers can be controlled using HMI • Power Flow across the AMPS is displayed on the HMI

  14. OPC Standard • Object Linking and Embedding for Process Control(OPC) • Standard for open connectivity of industrial automation

  15. Communications

  16. Communications • Port 16 of SEL 2030 is used to communicate with the PC. • SEL 2030 communicates with other relays on other ports • Serial cable is used for the communication with a baud rate of 19200kbps

  17. Communications

  18. Communications • Implementing ethernet communication was attemptedbut the PC and SEL 2030 are on different ethernet networks. • IP address of SEL 2030 cannot be changed as it is accessed by fault matrix server PC

  19. Results • HMI interface - complete • Communication between the 2030 and ClearView over serial – complete

  20. Future Work • Dedicated PC for HMI with configurable IP address is recommended in Lab • Ethernet communication between SEL 3306 synchrophasor processor and PC need to be set up.

  21. QUESTIONS?

More Related