1 / 1

Development of Characterization Tools for Contaminated Nuclear Stacks

Development of Characterization Tools for Contaminated Nuclear Stacks. William Mendez (DOE Fellow), Mario Vargas (DOE Fellow) - Florida International University Mark Noakes (Mentor) - Oak Ridge National Laboratory. Inner Drum. Linear Actuator #2.

nathan
Download Presentation

Development of Characterization Tools for Contaminated Nuclear Stacks

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Development of Characterization Tools for Contaminated Nuclear Stacks William Mendez (DOE Fellow), Mario Vargas (DOE Fellow) - Florida International University Mark Noakes (Mentor) - Oak Ridge National Laboratory Inner Drum Linear Actuator #2 The transferable contamination survey or swiping, is an assessment of the amount of readily removable contamination present on a surface. A collection medium is used to wipe a surface while applying moderate pressure. For several reasons, this conventional technique becomes a lot more complicated for the characterization of nuclear stacks. First of all, the poor physical condition of the structures, which represents the case for most of the stacks at every DOE nuclear facility, does not allow the direct participation of humans during the implementation of this contamination test. Linear Actuator #1 Outer Drum Side Plate # 1 Roller Tool Development Background • The mechanism consists of a DC motor, two hollow drums, two linear actuators and six rollers that the filter paper for the swipe will be adhered to. For the assembly displayed on the left, only one roller and a main shaft is shown. The illustrations provide the dimension Inner Drum, the Linear Actuator #2, Roller, Main Shaft, Side Plate #1, DC Motor, Outer Drum and Linear Actuator #1. DC Motor Main Shaft Conclusion Problem Description • The characterization is complete when sufficient information is collected, taking into account uncertainties. • An automated technology that handles the difficult task of characterizing nuclear stacks does not exist. • Several technologies and methods are available to perform characterization. However, some cases require special planning in which highly skilled engineering is needed. • The limited literature information regarding the stacks characterization process. • The stacks located at Oak Ridge National Laboratory are within an active complex office. • There are not available technologies on the market capable of this type of operation without direct human intervention. Alternative Designs Wall Special Thanks to: • Mark W. Noakes (Mentor), Robotics and Energetic Systems Group, Oak Ridge National Laboratory. • Francois Pin (Fellow & Group Leader), Robotics and Energetic Systems, Oak Ridge National Laboratory. • Leonel E. Lagos, Ph.D., PMP® (FIU Mentor), Applied Research Center, Florida International University. Operations automatically done on the wall

More Related