1 / 2

Total DIY Guide For Detecting Faulty Inverters

Itu2019s essential to know the cause of faulty inverters as inverter has become an essential part of everyoneu2019s homes and offices because they help us in getting electricity when there is no power. So check out this DIY guide to make your inverters work properly.

nationwidesolar
Download Presentation

Total DIY Guide For Detecting Faulty Inverters

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The Inverter has become an essential part of everyone’s homes and offices, as they help us in getting electricity when there is no power. However, when the invertor encounters some issues or stops working, it leads to no lights, no computers, and several other problems. It’s essential to know the cause of faulty inverters to make them work properly which hinder your smooth workflow. Inverter not turning on It is the most common inverter problem caused when LG chem battery is disconnected, terminals are loose, or inverter is tripped. There is a possibility that terminals could be loose or reversed which can be fixed by an individual without an expert’s requirement. Else if there is corrosion, clean the terminals before clamping them firmly. At times the power switch is defective, or if your battery is discharging, you should show it to the service center for repair.

  2. Short backup time This issue comes across when there is more power consumption directing you to reduce the load on it. This also arises when the battery is not properly charged or has lost electrolyte. The best alternative to sorting this issue is by filling it with distilled water periodically by maintaining water level between the maximum and minimum water limit. The battery is not being charged The principal reason of battery being not charged is that its dead or rectifiers are burnt. There are other possible causes such as fuses melting or loose battery connections. In such situations, you should seek professional help to know the exact reason behind it. InstallingLG chem battery gives an optimum performance as well as a better life. Alarm beeping continuously Many times, inverter’s alarm keeps on beeping endlessly, due to overloading or being stuck in the cooling fan, lessening the load will solve this issue. If this doesn’t work, see a service center to solve the issue of alarm. Power inverter working in the inverter mode If this is the scenario, either the input is not connected, or the fuse has melted. You should check the power cable and replace the fuse respectively if power inverter works in inverter mode. Another reason could be input protector is not working properly, reset it and see the changes after it. Make sure that you buy a wide range of UPS for your system if this continues. One can check and solve minor electronic issues at home, but some problems require experts to help for rectification. For such instances, it recommended getting in touch with skillful professionals to get your inverter fixed. The experts solve every common and complicated issue related to inverters in residential and commercial spaces.

More Related