1 / 12

A Quick Guide on Buttweld Fittings

Butt welding is a commonly used technique in welding that can either be automated or done by hand on steel pieces. Our offered range of Buttweld fittings are generally used for ordinary piping in steam, water, oil, gas, etc and many other applications.

naturalsteelsmumbai
Download Presentation

A Quick Guide on Buttweld Fittings

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. www.naturalsteels.com A Quick Guide onButtweld Fittings Presented By

  2. About Buttweld Fittings Butt welding is a commonly used technique in welding that can either be automated or done by hand on steel pieces. Our offered range of Buttweld fittings are generally used for ordinary piping in steam, water, oil, gas, etc and many other applications. www.naturalsteels.com

  3. 90 Degree Elbow ANSI B16.9 90 Degree Elbow Fittings are used in areas having larger spaces than 45 degree elbows. It turns the spacing and directions of the pipes fitted together by 90 degrees altogether. This 90 Degree Elbow is exported and supplied to our clients at the most competitive and reasonable pricing. www.naturalsteels.com

  4. Buttweld pipe Crossfittings are a pipe attachment in which a pipe is inserted into a recessed area of a valve, fitting or flange. They are used primarily in the small pipe diameters for piping nominal diameter pipes and also it provides benefits like high leakage integrity and great structural strength.  Cross www.naturalsteels.com

  5. Ensuring these ANSI B16.9 End Caps are manufactured using unblended, unadulterated core raw materials paves the red carpet for the high satisfaction of the clientele associated and trusted with us. This pipe end cap is a type of pipe fitting that is used to cover the ends of a pipe. Caps www.naturalsteels.com

  6. We manufacture these Teepipe fittings using stainless steel, Cupronickel and brass and many other material and grades, our range is widely used for connecting pipes of different diameters. Our offered range capable of withstanding high pressure & temperature and resisting to corrosion. Tee www.naturalsteels.com

  7. A Concentric Reducer is utilized to establish a connection between pipe sections or tube sections on the same axis. Made up of optimum quality metal like stainless steel, Cupronickel and brass, these concentric reducers are easily available in the national and international market. Concentric Reducer www.naturalsteels.com

  8. Eccentric Reducersare most commonly used in industrial pipe fittings for adapting different sizes of pipes in a system. Eccentric reducers are used to reduce into and out of circulating pumps. Eccentric reducers bridge small ad big pipes together, reducing the noise and vibrations produced.   Eccentric Reducer www.naturalsteels.com

  9. We deliver supreme graded 180 Degree Elbowfittings to our customers worldwide. These 180 Degree elbow fittings are used in areas having more spaces for pipes than 180 degrees, they turn the entire angle of orientation of the pipes joined together by 180 degrees. 180 Degree Elbow www.naturalsteels.com

  10. 45 Degree Elbows are used to change the direction or flow in a piping system. They are available in the long radius version and the short radius version. The function of the ANSI B16.9 45 degree elbow is same as that of the 90 degree long radius elbow except that their centre to face dimensions is unequal. 45 Degree Elbow www.naturalsteels.com

  11. Stub Endsare fittings used in place of welded flanges where a rotation back up of flanges is desired. Rotating back up flanges is set up at the back surface of the Stub End. The Stub Ends are manufactured in all standard dimensions in flanged, Victaulic and threaded ends. Stub End www.naturalsteels.com

  12. Thank You! Visit us: Facebook | Twitter www.naturalsteels.com Contact us: Tel No.+91 22 6651 8616 / 6659 5953 Email:sales@naturalsteels.com

More Related