1 / 18

P.C.O.C. Training

P.C.O.C. Training. BEST MANAGEMENT PRACTICES VOLUME I INSPECTION (EVALUATION PROCESS). Inspection Inspection is the foundation to any good pest management program. Review Existing Problem with Customer. An interview with the customer is important.

navid
Download Presentation

P.C.O.C. Training

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. P.C.O.C. Training BEST MANAGEMENT PRACTICES VOLUME I INSPECTION (EVALUATION PROCESS)

  2. Inspection Inspection is the foundation to any good pest management program

  3. Review Existing Problem with Customer An interview with the customer is important The customer’s perception of the problem may be different than the PMP. The customer is a good guide to evaluate current pest problems.

  4. Identify Pest The proper identification of pests is crucial It is necessary to properly identify pests to properly plan a pest management strategy. Misidentification can result in the use of ineffective control methods.

  5. Determine Tolerance Level Each customer will have a different sensitivity to pest populations There are many variables that go into determining tolerance levels Fear of pests Perceived or real impact on health or property Risk of contamination to products or production equipment If tolerance levels for a particular pest have been exceeded, it is time for IPM

  6. Assess Target and Non-Target Species The inspection and interview will reveal which pest species are of particular concern. Effort must be made to ensure the safety of non-target species.

  7. Bait Stations In situations requiring baiting, properly secured tamper resistant stations will help reduce the hazard to non-target species. Non-chemical treatment techniques should be employed in environmentally sensitive areas where non-target species are present

  8. Identify Harborage Areas Harborage areas should be identified for the pests of concern. An action plan should be developed with the customer to find the best way to reduce the pest harborages.

  9. Determine Conducive Conditions It is necessary to identify where pest are living Actual and potential harborage areas should be identified for the pests of concern.

  10. Determine Conducive Conditions An action plan should be developed with the customer to find the best way to reduce the pest harborages.

  11. Identify Waterways It is necessary to identify any waterway on or near the property to be treated Applications should be avoided in close proximity to lakes, ponds, rivers, streams, and other waterways

  12. Identify potential run off areas Treatments with residual materials in and near drains, gutters, ditches and other areas where water flows during precipitation or irrigation must be avoided.

  13. Evaluate Irrigation System/Watering Cycle Irrigation is needed but the impact of irrigation water on pest control materials and pests must be considered. • Over watering could cause trace amounts of pesticides to end up in waterways. • Over watering can also attract pests which may result in the need for additional chemical applications.

  14. Assess Environmental& Weather conditions The PMP should evaluate weather conditions prior to making a chemical application. If precipitation is expected, exterior treatments should be postponed or limited to areas protected form the weather.

  15. Identify Landscape Type and Treatment Surfaces Hardscapes, such as concrete and asphalt do not hold some materials very well. Different soil types vary in how well they retain pesticides.

  16. Identify Landscape Type and Treatment Surfaces Care should be taken to place treatments into pest harborages such as cracks and crevices to maximize effectiveness and minimize the amount of materials needed.

  17. Documentation It is necessary to communicate the findings of the inspection in writing When making recommendations for correction to a customer, do so in writing. This will reassure the customer that what you are saying is important and increases the chances that they will follow your professional recommendations

  18. Recap Inspection (Evaluation Process) • Review existing problem with customer • Identify pests • Determine tolerance level • Assess target and non-target species • Identify harborage areas • Determine conducive conditions • Identify waterways • Identify potential run off areas • Evaluate irrigation system/watering cycle • Assess environmental/weather conditions • Identify landscape type and treatment surfaces • Documentation

More Related