490 likes | 710 Views
Adaptive Optics. AO Team. Outline. Solar AO – What is different? High order AO development – a prototype for ATST AO ATST AO requirements Design Concepts wavefront sensor DM WFS optics. Solar AO. Small r0 (visible&day-time seeing) Near-ground turbulence High temporal frequencies
E N D
Adaptive Optics AO Team
Outline • Solar AO – What is different? • High order AO development – a prototype for ATST AO • ATST AO requirements • Design Concepts • wavefront sensor • DM • WFS optics
Solar AO • Small r0 (visible&day-time seeing) • Near-ground turbulence • High temporal frequencies • Extended object • Object evolves in time (sec –min) • Photons are plentiful (broad-band)
Wavefront Sensor Noise • Night time AO: • S/N limited by # of photons collected and detector noise (<1-3e-) • Limiting magnitude • For faint objects: laser guide stars required • Solar AO: • S/N limited by image contrast (Michau et al 1992) - granulation 1.5 –2 % contrast for d ~10cm and high frequency content in object (Poyneer 2003) • Larger FOV to track on large scale structure: Yes but, average over many isoplanatic patches > only turbulence near telescope is corrected • Flat Field Problems are deadly!! Partially filled apertures are problematic! • Background: Photon noise dominates - Detector noise is not an issue. CCDs with large wells are preferred.
Progress in steps • Low- Order AO: 24 subapertures @ 1.2-1.5 kHz • High-Order AO: 76 subsparture @ 2.5 kHz • Next: ATST- AO: order 1000 subapertures, >2kHz
The NSO low-order AO system Dyson IF 24 subapertures Correlating SH-WFS Collimator/Camera lens Video , AO corrected Wavefront Sensor DM 97 WFS camera
Disk Center Intensity & Magentogram: 6302 A Exp: 18 sec
FeI 5576A line: h~200km Intensity Map & Velocity Map Dark: downflow Bright: upflow First direct measurements of flows in magnetic flux tubes Exposure: 30sec
Large variations in Strehl on short time scales • Lack of consistent time sequences • Interpretation of spectral, polarimetric data becomes difficult High order AO
HO-AO – 76 subapertures high Strehl for median r0maintains reasonably high Strehl as seeing fluctuates
High order AO WFS geometry Pupil image & lenslet d=7.5 cm subaperture – pushing it for granulation Subaperture images 2-d x-correlations Camera arrangement
Parallel processing using DSPs See K. Richards for details
Intelligent 2.5kfps CMOS AO camera Poster by K. Richards
DSP WFS&Reconstructor Mostly off-the-shelf parts
Performance • Detailed performance characterization in progress: Strehl > 0.7 • Update rate: 2500 Hz • Servo delay: • 400 μsec readout + 250 μsec processing = 650 μsec • Bandwidth: ~130 Hz (0dB cross-over error attenuation)
WFS DLSP UBF
High order AO: Digitized real-time video Seeing: mediocre&highly variable
High Order AO + UBF: FeI 5434 wing intensity
Summary • The high order solar AO operational DST • Closed-loop bandwidth: 130 Hz • Diffraction limited imaging over long periods of time • High Strehl ratios • First Scientific results – MHD confirm fundamental model predictions • Successful stepping stone towards ATST AO!
Requirements:see SRD • The ATST shall provide diffraction-limited observations (at the detector plane) with high Strehl (S > 0.6 (goal S>0.7) during good seeing conditions (r0(500nm) > 15cm); S> 0.3 during median seeing (r0(500nm) = 10cm) ) at visible and infrared wavelength. • The wavefront sensor must be able to lock on granulation and other solar structure, such as pores and umbral and penumbral structure. • Time sequences of consistent image quality are required for achieving many of the science goals. • Robust operations.
ATST AO PERFORMANCE Fitting error & Bandwidth error only
Adaptive Optics for the ATST NIR (1.6 micron) High Strehls should be fairly easy to achieve! The HO-AO system just developed would do reasonably well
AO Performance • The site is the most important factor • The site will ultimately determine the performance • Cost, Complexity scale with (D/r0)2 • Subabperture size ~ r0: • Contrast in subaperture images > WFS noise • Isoplanatic angle > FOV for correlation tracking > WFS noise and average over several isoplanatic patches • Bandwidth: fG ~ v/r0 ; σ2 ~ (fG/fs) 5/3
10 cm subaperture 1232 Subapertures 1313 Actuators
80 MHz Clock 2 - 32bit float MAC per clock 160 MAC per second 2 subapertures per DSP 300 MHz Clock (500Mhz) 8 - 16bit int MAC per clock 2400 MAC per second >15 times as fast! 20 subapertures per DSP Hammerhead vs. Tiger Sharc
CAMERA 800x800 32 ports 40 MHz 2000 fps SMART INTERFACE Camera To DSPs Sorts Pixels Into Subapertures 64 DSPs – 300MHz 2400 16bit MACs per second Link Port to RS422 Deformable Mirror Tip/Tilt Mirror Monitor D/A Keyboard Network Remote Control Data Collection Off-load fixed aberrations Host Computer
SH-WFS Camera • Need: ~ 8002 pixel camera • > 2000fps • Custom Camera: CCD or CMOS or Hybrid • CCD: 32+ parallel readouts @ 40 MHz • Contacting vendors: • E2V (doable but $$$) • 1kx1K running at 1kHz exist (in contact with vendors/developers) • Design Contract with one or more vendors soon • Alternative (maybe not): split optically (e.g., prisms). Alignment? Stability?
DM • A number of ~1000 actuator systems are in operation • “Off-the-Shelf” item at Xinetics, Inc. • Baseline design requires 5mm actuator spacing • New control electronics, 20 channels on 3U board, < $100/per channel. Availability: end of 2003 • Big Issue: Thermal Control! (Nathan Dalrymple) • ~900W/m2 (200mm pupil, R=90%) • Air-cooled or liquid cooled
Optics • Integrated AO • Where do(es) the wavefront sensor(s) go? • Close to instrument(s) preferred • Right after DM • Uncommon path issues, air path to Coude lab • Other Drivers/Issues: • Interaction with instrumentation, scanning, modulator, analyzer • Complexity due to multiple instrument setup requirement
Reconstruction • Modal Reconstruction • Simple Zonal Approach won’t work because of rotation between WFS and DM • Or: Rotate WFS • Methods very much the same as in night time AO • Issues: • Alignment of WFS and DM actuator grid • Pupil wobble • Develop optimized reconstruction algorithms • Continuously update of reconstruction matrix
PSF Estimation • Needed for quantitative analysis. E.g. Photometry • Important in particular for extended objects • Interpretation of low Strehl observations • Should be/Will be standard product of AO system • Status: under development, collaboration with Gemini AO folks (J.P. Veran) and CfAO and ONERA
Estimation of long exposure PSF from wavefront sensor statistics. Implement as standard feature! PSF MTF
Long exposure w/AO at DST Fair Seeing High altitude seeing Sum of 11 one sec. exposures Destretched before averaged
Long exposure w/AO at DST Good seeing Good high altitude conditions Sum of 11 No destretch
MCAO • Large subaperture FOV • (60+ arcsec) • 3 ROIs in FOV (~10x10 arcsec) • 3 “guide stars” • Enough real estate on device • Read-out at sufficiently high frame rates