1 / 13

Nat Type Change

Nat Type Change. Speed Touch and Thomson Modems. Steps. Disable uPNP Static Ip on Console Putty Download Telnet Procedure. Disable uPNP. Type 192.168.10.254 on browser Go to Toolbox and then to Game and Application Sharing Click Configure Uncheck uPNP and click apply Screenshots.

nelia
Download Presentation

Nat Type Change

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Nat Type Change Speed Touch and Thomson Modems

  2. Steps • Disable uPNP • Static Ip on Console • Putty Download • Telnet Procedure

  3. Disable uPNP • Type 192.168.10.254 on browser • Go to Toolbox and then to Game and Application Sharing • Click Configure • Uncheck uPNP and click apply Screenshots

  4. uPNP Screenshots Steps

  5. Static Ip On Console • Click on Home Network • Click on your device (This can be either on Wireless or Ethernet , and normally it should start with unknown.) • Click on Configure • Check the option “Always use the same ip address. • Write down the ip address (e.g 192.168.10.1) • Click Apply to save the settings Screenshots

  6. Static Ip On Console Next

  7. Static Ip On Console 2 Next

  8. Static Ip On Console 3 Back

  9. Putty Download • Search Google for Putty Download • Click on the Putty Download Page • Under the Windows x86 , click on the putty.exe to download and save it in the computer • Link http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html Steps

  10. Telnet Procedure • Open Putty.exe • Input on Host Name the address 192.168.10.254 (1) • Click on Telnet (2) • Click on Open (3) • When the program opens , put “cytadsl” for username • For Password input “cytaspeed” Next

  11. Telnet Procedure 2 • When the telnet open completely , we need to input the command nat tmpladd intf=pppInternet type=nat outside_addr=0.0.0.1 inside_addr=192.168.10.4, changing the number 4 with the number of the ip address we had on the modem and clicking enter after that • Write saveall • Write exit Screenshots

  12. Telnet Procedure Screenshots 1 2 3 Putty Interface

  13. Put cytadsl as username ,press enter ,cytaspeed as password press enter .Follow the instructions on slide 11 Steps

More Related