160 likes | 383 Views
DEPARTMENT OF BIOMEDICAL ENGINEERING. University of Wisconsin-Madison. Anna Karas Meghan Olson Blake Hondl Zachary Cohen. Client: Dr. Christopher Green, MD. Advisor: Mitch Tyler. Problem Statement. PTT is not calculated with the current Sleep Apnea Equipment (Flaga system)
E N D
DEPARTMENT OF BIOMEDICAL ENGINEERING University of Wisconsin-Madison Anna Karas Meghan Olson Blake Hondl Zachary Cohen Client: Dr. Christopher Green, MD Advisor: Mitch Tyler
Problem Statement • PTT is not calculated with the current Sleep Apnea Equipment (Flaga system) • Design a solution which interfaces with the current system and is capable of detecting and measuring changes in pulse transit time which occur due to vasoconstriction during a micro arousal
Design Constraints • Must interface with existing Sleep Apnea Study Equipment • Cannot void current system’s warranty • Accurately detect the ECG and Pulse Oximetry peaks • Must reject signals due to noise or motion artifact • Calculate PTT • Correlate PTT with other sleep study measurements
Sleep Apnea: Biological Aspect • Affects 12 million Americans • Obstructive Sleep Apnea • Is caused by obstruction of the trachea (windpipe) • From tongue, tonsils, uvula, fatty tissue in the throat, and/or relaxed muscles • Individual can stop breathing for 10-30 sec. • Low blood oxygen level activates “flight or fight” response • releases adrenaline • causes vasoconstriction • Individual brought out of REM sleep • Can occur every 1-4 minutes (~400 times a night) • Results in health problems and poor sleep
t Pulse Transit Time Theory • Obstruction of breathing causes release of endorphins monitored by cerebral cortex • The blood vessels constrict causing higher blood pressure (blood flows faster) • The amount of time from heart pumping blood for the pressure wave to reach an extremity decreases • PTT is correlated with micro arousals Signal from ECG machine Signal from Pulse Oximeter Time will decrease with a micro arousal Measure from peak
PTT Correlates to Micro Arousals • Blood pressure rises imply arousals (through PTT) are as good as EEG micro-arousals at predicting subjective sleepiness • PTT detects subcortical/autonomic arousals, currently undetected by EEG monitoring • ΔPTT is a sensitive indicator of inspiratory effort variance due to obstructions • PTT detects events of a respiratory obstruction, but cannot differentiate types of events » v = K*√{V*ΔP/ΔV} « v=Pulse Wave Velocity V= Initial Vessel Volume K= Constant ΔP= Pressure Delta ΔV= Vessel Volume Delta
FLAGA / Somnologica System • Incorporates a variety of sleep study signals: EOG, EEG, ECG, Pulse Oximeter, Respiratory CO2 , Noise/Vibration (snoring), Visual monitoring • Signals can be sampled at 2-2000 Hz • Somnologica program process signals and displays information in GUI format • Data can be extracted in European Data Format (EDF)
Design 1: Spaced Transducer Technique Pressure Sensor Pressure Sensor Pressure Sensor • Original method to test PTT • Pressure sensors placed on skin consecutively on an artery • Sensors measure the pulse moving in the artery below • Sensors placed known distance apart (d) • Analog to Digital conversion of signal • Calculate the time between when the first sensor feels the pulse and the second • Real time PTT calculation • Store information for later reference d d
Advantages Simple design Low cost Independent of Flaga system Disadvantages Noisy signals Difficult to use with sleeping patients Inaccurate compared with other techniques Design 1: Spaced Transducer Technique
Design 2: Automated Ambulatory Blood Pressure • Blood pressure can be measured and correlated with PTT • Measure blood pressure with piezoelectric microphones • Measures systolic and diastolic blood pressure • Portable, lightweight, can run on batteries • Used from 24-48 hr. periods • measurements taken at set intervals (~every 5-60 min.) • Tiba Medical • ~$1800 for a unit • $225/month to rent • Connects to PC • 512 MB storage capability
Advantages Lightweight Portable Interface with computer for post analysis Past studies show it does not effect sleep of child Another way to measure micro arousals (correlated to blood pressure increase) Disadvantages Costly Dependent on cuff inflation Data can only be taken at intervals of 5- 60 min. Not a continuous measurement Micro arousals may not be detected Design 2: Automated Ambulatory Blood Pressure
Design 3: PTT Software Solution • Interface with existing Flaga System • Stored data interfaces with Matlab • Programming • Signal analysis • Rejection of motion artifact • Detection of QRS and Pulse Oximeter wave • PTT calculation • Correlation of PTT with collected data from Flaga • Via Epic Number
Advantages Feasibile Cost Meets client requirements Interfaces with existing system No additional signal measurements required Provides accurate PTT Disadvantages Not real time Not portable Design 3: PTT Software Solution
Design Matrix Rated 1-3: 1=Best, 3=Worst
Potential Problems/Future Work • Obtaining real-time signal from FLAGA system to output PTT in real-time • Motion artifacts are introduced into ECG, influencing PTT • Need processing algorithms to account for this Using Matlab develop algorithms to detect wave peaks Create rejection algorithm for motion artifact Convert EDF to text file Calculate PTT & display
Appendix / References • http://www.biopac.com/AppNotes/app117PTT/ptt.html • http://www.tibamedical.com/ABPM.htm • http://www.medicinenet.com/sleep_apnea/page5.htm • http://www.disabilitysecrets.com/medicine-medication-prescription-drugs-sleep-apnea.html • http://www.aafp.org/afp/20030601/2343.html