260 likes | 2.13k Views
Toyota 1KZTE Torque Sequence. HEAD BOLT P/N 30086005 QUANTITIES: 18 @ 128/55mm M12 x 1.25mm HEAD BOLT TIGHTENING SEQUENCE. STEP ONE: 20Nm STEP TWO: 40Nm STEP THREE: +90* STEP FOUR: +90* IMPORTANT: ALL BOLT THREADS, BOLTHEADS AND WASHERS MUST BE LIGHTLY OILED.
E N D
Toyota 1KZTE Torque Sequence • HEAD BOLT P/N 30086005 QUANTITIES: 18 @ 128/55mm M12 x 1.25mm • HEAD BOLT TIGHTENING SEQUENCE. • STEP ONE: 20Nm • STEP TWO: 40Nm • STEP THREE: +90* • STEP FOUR: +90* • IMPORTANT: ALL BOLT THREADS, BOLTHEADS AND WASHERS MUST BE LIGHTLY OILED. • USING AN OLD HEADBOLT WITH GROOVE CUT DOWN THREAD, CLEAN THE BLOCK HEADBOLT THREADS. 14 6 3 11 8 1 16 9 17 FRONT 15 18 7 2 10 4 5 12 13 www.kiwicylinderheads.co.nz0800-549-429