1 / 267

[Post Processor]

[Post Processor]. [General]. Download Path=c:download. CNC File Extension = tap. Start Position = 1. Kerf at the control = no. jog speed = 1000. Default Numeric Format = ###[#.###]. Data = Absolute, Inches. Axis = X,Y.

newton
Download Presentation

[Post Processor]

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. [Post Processor]

  2. [General]

  3. Download Path=c:\download\

  4. CNC File Extension = tap

  5. Start Position = 1

  6. Kerf at the control = no

  7. jog speed = 1000

  8. Default Numeric Format = ###[#.###]

  9. Data = Absolute, Inches

  10. Axis = X,Y

  11. prompt=NewFeed,0,BurnTool,0,UseLoop,0,LastUp,0,CutTool,0,OnePart,0,HtSensOn,0prompt=NewFeed,0,BurnTool,0,UseLoop,0,LastUp,0,CutTool,0,OnePart,0,HtSensOn,0

  12. Line Number Setup = 10, ####, 0 '(0 means only use when requested in code)

  13. Zero = 0

  14. Program Number Format = [########]

  15. save options = no

  16. Prompt Label = yes

  17. Post ID = 1

  18. Show tool colors = Yes

  19. read from tlt = NO

  20. use colors = no

  21. status bar = no

  22. single step = no

  23. allow multipass = no

  24. Maximum arc angle = 180

  25. [Prompts]

  26. LastX,0,0

  27. LastY,0,0

  28. SheetOffset,0,0

  29. [Begin sequence]

  30. (SheetOffset=0)

  31. '%

  32. 'P(pn)

  33. 'G70

  34. G90

  35. 'M10T2

  36. 'M71T5

  37. (UseLoop=0)

  38. (OnePart=0)

  39. (LastUp=0)

  40. (CutTool=0)

  41. (BurnTool=0)

  42. (NewFeed=0)

  43. (HtSensOn=0)

  44. [End Program]

  45. [End Sequence]

  46. 'If (Sheet)=1

  47. ' if (OddSheet)=1

  48. ' if (SheetOffset)=0 • ' M00

  49. 'G00X(SheetOffset-LastX)Y(LastY-LastY-LastY)

More Related