40 likes | 215 Views
Connecting to a Projector via Video Cable. Connecting to a Projector via Video Cable (1/2). Turn on Epson projector remote control by sliding slider switch to right of red Power button toward front of remote Point remote at projector & push the red Power button The projector will beep
E N D
Connecting to a Projector via Video Cable (1/2) • Turn on Epson projector remote control by sliding slider switch to right of red Power button toward front of remote • Point remote at projector & push the red Power button • The projector will beep • The status light on the projector will begin to flash green • The projector will display auto-setup on the screen • Wait for the projector to finish focusing before connecting the cable. (See next slide.) • Push the Comp1source button on projector remote • Locate the cable with the Video plug& Audio plug:
Connecting to a Projector via Video Cable (2/2) Connect to Expansion Base ←or → directly to EliteBook 2740p Connect the Video connector to the monitor port Connect the Audio plug to the headphone or speaker jack HP Ultra-slim Expansion Base HP EliteBook 2740p direct connection As needed, hold Fn + press & release F4 to cycle through 4 output options: As needed, adjust the Tablet PC & ceiling speaker volume. Ceiling speaker remote control
The End! • Still have a question? Contact the IT Department for further assistance: • E-mail: IT.Support@LFCDS.org • Call: x222