1 / 18

Step-by-step

Here is how simple it is to get on the Mesh. Step-by-step. Go to HSMM-MESH website – Software Download page. Save the proper file for your model. If purchased used, push and hold the reset button on the back with a pen or similar object for 10 seconds.

nicola
Download Presentation

Step-by-step

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Here is how simple it is to get on the Mesh... Step-by-step www.HSMM-MESH.org

  2. www.HSMM-MESH.org Go to HSMM-MESH website – Software Download page

  3. www.HSMM-MESH.org Save the proper file for your model

  4. www.HSMM-MESH.org If purchased used, push and hold the reset button on the back with a pen or similar object for 10 seconds

  5. www.HSMM-MESH.org Connect PC to router, boot PC, open favorite browser, and log in to router administration page (no username, pass: admin)

  6. www.HSMM-MESH.org Go to Administration page

  7. www.HSMM-MESH.org Go to firmware update tab, click browse and select the file you saved earlier

  8. www.HSMM-MESH.org DO NOT remove power while it is updating

  9. www.HSMM-MESH.org SUCCESS ! Router will reboot and become an HSMM-MESH node

  10. www.HSMM-MESH.org Need to refresh your computer's IP address. Click START and Run, type in CMD and hit OK

  11. www.HSMM-MESH.org Type IPCONFIG /release <enter> and then IPCONFIG /renew <enter>. It should then show like the text in the yellow box below.

  12. www.HSMM-MESH.org In your browser, go to http://localnode:8080 . It should show you a screen like below

  13. www.HSMM-MESH.org Click the SETUP button and login. The default is root and hsmm

  14. www.HSMM-MESH.org Minimally, you need to set the node name and change the password. Your callsign must be in the node name (like K5KTF-100). Click SAVE

  15. www.HSMM-MESH.org When you click SAVE, it will reboot.

  16. www.HSMM-MESH.org After about 60 seconds, it will refresh and show the main status page

  17. www.HSMM-MESH.org Clicking MESH STATUS will show you any nodes it may be connected to.

  18. www.HSMM-MESH.org From the Main page, clicking the WIFI SCAN button will show you any other Wifi access points it may see

More Related