1 / 21

Czech vocational projects – engineering and plastic industries by Requalification Centre Opava

Czech vocational projects – engineering and plastic industries by Requalification Centre Opava. EU Projects of Requalification Centre Opava. 1. 2. 3. „R ETRAIN YOUR EMPLOYEES IN OUR CENTRE or SELECT FROM OUR SUCCESSFUL GRADUATES! “.

nishan
Download Presentation

Czech vocational projects – engineering and plastic industries by Requalification Centre Opava

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Czech vocational projects – engineering and plastic industries by Requalification Centre Opava

  2. EU Projects of Requalification Centre Opava 1. 2. 3. „RETRAIN YOUR EMPLOYEES IN OUR CENTRE or SELECT FROM OUR SUCCESSFUL GRADUATES!“

  3. Requalification Centre for Multidemensional ProcessingProject 1 Withinthisprojectthe „Requalification Centre forMultidemensionalProcessing“ wasestablished. The retraining pilot course „OPERATOR AND PROGRAMMER OF CNC MACHINES” havetaken placethere. Budget: 125 716 EUR Executionofproject: 2005 – 2006 Grant Programme: PHARE 2003, HumanRecoursesDevelopment

  4. Requalification Centre for Multidemensional ProcessingProject 1 PROJECT OUTPUTS » 3 rounds of the course » 62 people were retrained » 55 successful graduates » 43 people were given job after graduation

  5. Precision Machining Retraining Centre (PMRC)Project 2 PMRC represents an educationalproject under which the „PROGRAMMING AND OPERATION OFCNC MACHINES” retraining coursetakes place.The course concerns the programming and operation of multi-dimensional 3D and 5D machines used in automotive and aerospace precision engineering. Budget: 5 944 535 CZK Executionofproject: 2006 - 2008 Grant Programme: EuropeanSocialFund (OP RLZ)

  6. Precision Machining Retraining Centre (PMRC)Project 2 PROJECT OUTPUTS » 5 rounds of the course » 76 people were retrained » 61 successful graduates » 47 people were given job after graduation

  7. Precision Machining Retraining Centre II (PMRC II)Project 3 • PMRC II is a project, under which the following retraining courses have taken place: • PROGRAMMING AND OPERATION OFCNC MACHINES • CNC PROGRAMMING AND OPERATION INSTRUCTORS Key idea of the project: to create convenient, compact and functioning methodology focused oninstructor training. Budget: 5 482 530 CZK Executionofproject: 2006 - 2008 Grant Programme: EuropeanSocialFund (OP RLZ)

  8. Precision Machining Retraining Centre II (PMRC II)Project 3 PROJECT OUTPUTS » 12 instructorswereretrained » 12 successfulgraduates

  9. Requalification Centre in OpavaVideo

  10. Requalification Centre in OpavaVideo Presentation name

  11. Projects of Training centres

  12. 1. 2. COPRECI Training Centre 3. 4.

  13. Building-up the Training Centre in KBA-Grafitec ABOUT PROJECT Budget: 21 230 000 CZK Executionofproject: 2008 - 2011 Grant Programme: EuropeanSocialFund (OPPI – TrainingCentres) Aimoftheproject: to providehigh-qualitybackroundfor management and implementationofhumanrecoursesdevelopmentactivitieswithinthecompany. ABOUT COMPANY Koenig & Bauer AG is a German multinational - the second largest printing presses producer in the world. KBA employs more than 7000 employees, primarily in Germany and the U.S.A. In 2004, company's turnover reached 1.423 billion Euro. Training Centre in KBA-Grafitec

  14. Building-up the Training Centre in KBA-Grafitec SpecificsofTraining centre: » buildingcapacity: 112 seats » utilization: 77 % »4 classrooms (50 seats) » Hands-on training centre (6 workplaces) » Auditorium (56 seats) » barier free entrance » lift, outsidecircularstair » parking area (19 pull-in) »changingrooms, toiletfacilities »kitchenette Training Centre in KBA-Grafitec

  15. Training Centre in IVAX Pharmaceuticals ABOUT PROJECT Budget: 18 030 000 CZK Executionofproject: 2009 - 2010 Grant Programme: EuropeanSocialFund (OPPI – TrainingCentres) Aimoftheproject: to providehigh-qualitybackroundfor management and implementationofhumanrecoursesdevelopmentactivitieswithinthecompany. ABOUT COMPANY IVAX Pharmaceuticals s.r.o., originally known as Galena, is an important traditional producer of pharmaceuticals. Trheproducts are exported to many countries of the world including the USA and Western Europe.The company successful operation is accomplished by approximately 850 employees. In 2006 the company became a part of the multinational group TEVA. Training Centre in IVAX

  16. Training Centre in IVAX Pharmaceuticals SpecificsofTraining centre: » buildingcapacity: 78 seats » utilization: 74 % »2x classrooms (40 seats) » 1x computerclassrom (18 seats) » Hands-on training centre (4 workplaces) » Laboratory (16 seats) »changingrooms, toiletfacilities »kitchenette Training Centre in IVAX Pharmaceuticals

  17. LINASET Training Centre ABOUT PROJECT Budget: 23 716 000 CZK Executionofproject: 2006 - 2008 Grant Programme: EuropeanSocialFund (OPPP – TrainingCentres) Aimoftheproject: to providehigh-qualitybackroundfor management and implementationofhumanrecoursesdevelopmentactivitieswithinthecompany. ABOUT COMPANY Linasetis a producerof thermosetting plastics through direct pressing, transfer andinjectionmolding. Linaset offers a comprehensive service starting with the development of molding, through working out of drawing documentation and production of mold to deliveries of individual moldings and/or finished parts. Companyemploys more than 550 employees. LINASET Training Centre

  18. LINASET Training Centre SpecificsofTraining centre: » buildingcapacity: 20 seats » utilization: 78 % »classroom (20 seats) »Hands-on training centre »changingrooms, toiletfacilities »kitchenette LINASET Training Centre

  19. CORPECI Training Centre ABOUT PROJECT Budget: 13 630 248 CZK Executionofproject: 2006 - 2008 Grant Programme: EuropeanSocialFund (OPPP – TrainingCentres) Aimoftheproject: to providehigh-qualitybackroundfor management and implementationofhumanrecoursesdevelopmentactivitieswithinthecompany. ABOUT COMPANY COPRECI has beenproducingandsupplyingcomponentsforthehouseholdappliancesectorsince 1963. COPRECI is part ofMondragónCorporaciónCooperatiova (MCC), theforemost business group in theBasque Country andseventh in therankingofSpain´s largestbusinesses. COPRECI CZ employs more than 200 employees. COPRECI Training Centre

  20. CORPECI Training Centre SpecificsofTraining centre: » buildingcapacity: 72 seats » utilization: 75 % »2 classrooms (72 seats) »changingrooms, toiletfacilities »kitchenette COPRECI Training Centre

  21. Contact Person Libor Witassek tel/fax+420 123 456 789e-maillibor.witasek@dcvision.cz DC VISION, s.r.o. – ZIRKON Office Center – Sokolovská 84-86 – 186 00 Prague - Karlín www.dcvision.cztel/fax +420 e-mail info@dcvision.cz

More Related