1 / 13

Seismic Isolation System Prototypes Seismometer Pod IDR

Seismic Isolation System Prototypes Seismometer Pod IDR. 12-23-03 Ref: 20008277-A. Objectives. Present preliminary designs of the seismometer pods Task 1 of the SEI Prototypes Implementation Plan (20008174-A)

nura
Download Presentation

Seismic Isolation System Prototypes Seismometer Pod IDR

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Seismic Isolation System PrototypesSeismometer Pod IDR 12-23-03 Ref: 20008277-A

  2. Objectives • Present preliminary designs of the seismometer pods • Task 1 of the SEI Prototypes Implementation Plan (20008174-A) • Obtain technical concurrence that the preliminary designs are complete enough to begin HAM and BSC configuration tasks • External dimensions of pods • Interfaces to supporting structure • Estimated mass

  3. Agenda • Design Summary • Preliminary Pod Designs • Open Issues

  4. Design Summary • As presented in ASI’s value engineering presentation, ASI’s pod design concept was predicated on round vs. rectangular configuration • Take advantage of heritage UHV technologies • Conflat • Wire-Seal • Pod designs presented will be common to both HAM and BSC prototypes • Stage 1 • Single pod concept is now three (3) individual pods • Flexibility in packaging & alignment • Stage 2 • Single pod design similar to that presented at the value engineering presentation

  5. Preliminary Pod Designs – Stage 1 STS-2 • Design Assumptions • Mounting plane is based upon a 16.50” OD Conflat with rotating flange • Lock actuator design is based upon the revised locker database using “bolted” interface • STS-2 Electrical interface of uses a 90 degree connector • External UHV connection is a 4.50” OD Conflat

  6. 11.07 IN STS-2 POD 16.5” CONFLAT WEIGHT: 136 LB 16.5 IN

  7. STS-2 POD WITH L-4C 19.56” WIRE-SEAL

  8. Preliminary Pod Designs – Stage 1 L-4C • Design Assumptions • Mounting plane is based upon a 6.00” OD Conflat • Internal Electrical interface uses a Size 12 connector shell • External UHV connection is a 2.75” OD Conflat

  9. 6 IN 1.95 IN 8.85 IN L-4C POD 6” OD CONFLAT WEIGHT: 17 LB

  10. Preliminary Pod Designs – Stage 2 GS-13 • Design Assumptions • Mounting plane is based upon a 10.00” OD Conflat • Internal Electrical interface uses a Size 12 connector shell • External UHV connection is a 2.75” OD Conflat • Two pod styles: “top” and “bottom” mount • Selection of best style will be made during configuration task

  11. 10 IN 15.49 IN GS-13 POD 10” CONFLAT BOTTOM MOUNT WEIGHT 83 LB

  12. 10 IN 15.45 IN GS-13 POD 10” CONFLAT TOP MOUNT WEIGHT: 88 LB

  13. Summary • Open Issues • ICD Status • STS-2 • GS-13 • L-4C • Review Action Items (AI’s)

More Related