100 likes | 245 Views
KX-TDE100/200 System (Version 1.0). Panasonic Communications Co., Ltd. Office Network Company Edition 1.3 4 th July, 2007. Chapter 2 General Installation Procedure. Chapter 2 General Installation Procedure. 1. Installation Preparation 2. Installation Procedure
E N D
KX-TDE100/200 System(Version 1.0) Panasonic Communications Co., Ltd. Office Network Company Edition 1.3 4th July, 2007 Chapter 2General Installation Procedure
Chapter 2General Installation Procedure 1. Installation Preparation 2. Installation Procedure 3. PC Programming Tool
1. Installation Preparation (1/4) Step1. Collect the Customers’ Request Configuration tool(This tool is currentlyunder development)
1. Installation Preparation (2/4) Step2. Which DSP do I require? Configuration tool(This tool is currentlyunder development)
1) Order Activation Key Card 3) Pay for Activation KeyCard 2) Get Activation key Card 1. Installation Preparation (3/4) Step3. Purchase Activation key Card from Sales Company Sales Company Dealer
Activation Key File 1. Installation Preparation (4/4) Step4. Get Activation Key from PCC Key Management System 1) Access PCC Key Management Systemto get Activation Key File Internet 2) Activation Key File Dealer PCC Key Management System
SD Card must be 128mb minimum – Smaller sized cards will not be supported 2. Installation Procedure (1/2) 1. Prepare TDE100/200, DSP16/64, other Optional Expansion cards, PT,SLT… and Activation Key Files 2. Connect PC with TDE100/200 via LAN cable (using the lower of the 2 LAN ports) or RS232C cable (Default PBX IP address is 192.168.0.101, port number is 35300.) 3. Start Quick Setup using PCMC 4. Set DHCP Client Setting “Enable” or set IP address manually Reboot 5. Start PCMC with new IPCMPR IP address
All virtual card status must be ‘OUS’ before using ‘Refresh Activation Key’ Activation Key File 2. Installation Procedure (2/2) 6. Install Activation Key file into SD card using PCMC (Utility Menu – File Transfer PC to PBX) KX-TDE100 KX-TDE200 7. Reboot or ‘Refresh Activation Key’ from PCMC (Utility Menu) 8. You can use IP-PT,SIP and IP-GW feature.
3. PC Programming Tool Graphical user interface is the same as TDA100/200/600 PC Programming Tool. (Supported on Windows Vista)
Chapter 2General Installation Procedure Thank you very much !