1 / 20

System Startup

System Startup. Configuring APACS & AAN Controllers. Getting Going…. Connect Controller. Connect power to the controller 12V ~1A Connect the controller to the network Use a network switch or crossover cable. Ethernet Switch. AAN-100. APACS PC. Check Operation.

olesia
Download Presentation

System Startup

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. System Startup Configuring APACS & AAN Controllers

  2. Getting Going…

  3. Connect Controller • Connect power to the controller • 12V ~1A • Connect the controller to the network • Use a network switch or crossover cable Ethernet Switch AAN-100 APACS PC

  4. Check Operation • When everything is connected correctly, check the LEDs to confirm proper operation

  5. Program the IP Address • InitAAN utilityto program • Ping to confirm

  6. Connect Reader Interface • Connect the AIM-4SL reader interface to the first communication port • Use ‘crossover’ wiring (T>R, R>T) • Set address of AIM-4SL with DIP switch

  7. Connect Reader • Follow reader instructions to connect wiresfor power, commsand LEDs/buzzer

  8. Install Software • Install from CD or download package from Apollo Website • A key is required to use APACS • Hardware key – USB dongle that plugs into the PC • Software key – A file that is downloaded from Apollo’s website after providing an activation code. Save the file in the APACS install directory.

  9. System Configuration • Launch System Configuration • Default user/password: 1/1 • Add PC • Right-click system tree: Add • Number isn’t needed • IP Address of local PC, usenumeric address or name

  10. System Configuration • Add the controller to the PC • Network communication type • Set IP Address in Communication Settings

  11. Add Reader • Add the reader to the controller • The first reader on an AIM-4SL is always master (matches number on DIP switch) • Select proper Port and Address • If you don’t have a door contact connected yet, go to hardware menu and unselect door contact control

  12. Config Check • Your system tree should now look like this:

  13. Permissions • Assign permissions to the default permissions set: ‘1’ • Make sure Message and Control permissions are granted for all objects

  14. Check Global Settings • Make sure global settings are correct for the system • Click on root of system tree • Save configuration

  15. Start Communication • Launch Alarm Mode • If messages are displayed for ‘Online’ then configuration is correct. Also check with Hardware Status

  16. Test a Card • Swipe a card at the reader • A message should display with the result • Card Format Error or Wrong Facility Code

  17. Set Card Format • Change Card Format in Controller Configuration to match the cards in use • Set the bit length and facility code • Save configuration and swipe the card again

  18. Create Access Level • Name the Access Level and then add reader/time zone • Use the system time zone ‘Always’

  19. Create User & Assign Access Level • Use the card number to create a new user with card and assign the AL

  20. First Access Grant

More Related