350-080 Exam Questions

1. 350-080 - CCIE Data Center Written exam in just 24 HOURS! 100% REAL EXAM QUESTIONSANSWERS 100-101 - Cisco Interconnecting Cisco Networking Devices Part 1(ICND) Buy Complete Questions Answers Filefrom http://www.exams4sure.com/Cisco/350-080-practice-exam-dumps.html 100% Exam Passing Guarantee & MoneyBack Assurance SampleQuestions

2. Question No1: In a configuration with redundant supervisors, how many IP addresses are required to configure full remote access via management0? Two IP addresses, one for eachsupervisor Three IP addresses, one virtual IP and one physical IP for eachsupervisor One IP address that is shared amongsupervisors None--management 0 will use the IP address from the first SVI that iscreated Answer: C Question No2: What is required for proper implementation of jumbo frame support on a Cisco Nexus 2000 Series FabricExtender? The interface configured as FEX fabric requires the MTU to be set to jumbo. The service policy must be applied to the systemQoS. The device defaults to jumbo frame support; no changes arerequired. The switchport in the FEX interface must be set to MTU9216. Answer: B Question No3: DCNM device discovery is done by connecting to Cisco NX-OS devices and doing which three of these? (Choosethree.) Collecting the runningconfiguration Raising the logging level to meet the minimumrequirement Discovering all devices bydefault Discovering devices using multiple user accounts as long as they are administrator-level accounts Using LLDP to discover networkadaptors Answer: A, B,E Question No4: What does the mac packet-classify command do when applied to an interfaceconfiguration? It enables MAC ACLs to be applied to only IP packets that enter theinterface. It enables MAC ACLs to be applied to only non-IP packets that enter theinterface. It enables MAC ACLs to be applied to all packets that enter theinterface. It enables MAC ACLs to be used for QoSsettings.

3. Answer: C Question No5: In a virtual port channel (vPC) configuration, VRRP exhibits whichcharacteristic? VRRP does not work with vPC due to industry standardrequirements VRRP works with vPC in traditional active/standby modes VRRP works with vPC in an active/active mode VRRP work with vPC as long as vPC peer-gateway is configured to address non-standard replies to the physical MACaddress Answer: C Question No6: On Cisco Nexus 5000 Series Switches, where are the virtual output queues implemented, and what is the main purpose of virtual outputqueues? On all ingress interfaces; to ensure maximum throughput on a per-egress, per-CoSbasis On all ingress interfaces; to provide independent congestion management and 16 queues On all egress interfaces; so that a congested egress port does not affect traffic directed to other egressports On all egress interfaces; to prevent head-of-line blocking by utilizing multiple virtual outputqueues On all egress interfaces; to be able to use EEE 802.1pCoS Answer: A Question No7: On the Cisco Nexus 7000 Series Switch, Control Plane Policing is enforced on which component? The supervisor module enforces CoPP before out-of-policy traffic reaches theCPU The fabric modules enforce CoPP in the fabric before out-of-policy traffic reaches the CPU The linecards enforce CoPP locally before out-of-policy traffic reaches theCPU The egress virtual output queue enforces CoPP locally before out-of-policy traffic reaches theCPU Answer:C

4. Question No8: You are troubleshooting a PIM neighbor adjacency that is not coming up. You issued the command show ip pim neighbor e1/18 and confirmed there is no PIM neighbor on the interface. What is the problem based on the debugoutput? 2012 Feb 23 23:00:08.676710 pim: [16132] (default-base) Received unauthenticated hello- message from 10.1.1.2on Ethernet1/18, messagediscarded 2012 Feb 23 23:00:12.528763 pim: [16132] (default-base) Send Hello with AHon Ethernet1/18 from 10.1.1.1, holdtimE.105 secs, dr-priority:1 The peer router 10.1.1.2 has PIM disabled on its interface connecting toEthernet1/18. The peer router 10.1.1.2 has the wrong PIM password configured on its interface connecting toEthernet1/18. The local router 10.1.1.1 has the wrong PIM password configured onEthernet1/18. The peer router 10.1.1.2 does not have PIM hello authentication enabled on its interface connecting toEthernet1/18. The local router 10.1.1.1 does not have PIM hello authentication enabled for Ethernet1/18. Answer: D Question No9: What is the benefit of using Anycast RP via RFC 4610 for IP multicast RPredundancy? Improves convergence of the multicast network due to enhanced RPFchecks Simplifies the number of control plane protocols over other RP redundancymethods Eliminates the use of Protocol Independent Multicast (PIM) in thetopology Increases the administrative distances in Multicast Source Discovery Protocol (MSDP) configuration Answer: B Question No10: Which two statements about Cisco Nexus 7000 line cards are true? (Choosetwo.) M1, M2, and F1 cards are allowed in the sameVDC. M line cards are service-oriented and likely face the access layer and provide Layer 2 connectivity.

5. F line cards are performance-oriented and likely connect northbound to the core layer for Layer 3connectivity. • M line cards support Layer 2, Layer 3, and Layer 4 with large forwarding tables and a rich featureset. • The F2 line card must reside in the admin VDC. • Answer: A,D • Buy Complete Questions Answers File from 100% Exam Passing Guarantee & Money BackAssurance • PDF Version + Test Engine SoftwareVersion • 90 Days Free UpdatesService • Valid for AllCountries http://www.exams4sure.com/Cisco/350-080-practice-exam-dumps.html