1 / 31

Solutions of system of nonlinear equations:

Solutions of system of nonlinear equations:. L 3. θ 3. L 4. L 2. θ 2. θ 4. s 1. 1. 4. 2. 3. Newton-Raphson Example 4:. The kinematic equations for a Four-Bar mechanism can be written as (5th semester, Mechanisms Course). L 2 =0.15 m L 3 =0.45 m L 4 =0.28 m s 1 =0.2 m.

omarm
Download Presentation

Solutions of system of nonlinear equations:

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Solutions of system of nonlinear equations: L3 θ3 L4 L2 θ2 θ4 s1 1 4 2 3 Newton-Raphson Example 4: The kinematic equations for a Four-Bar mechanism can be written as (5th semester, Mechanisms Course) L2=0.15 mL3=0.45 mL4=0.28 ms1=0.2 m Where link 2 is the input member. How do you calculate θ3 and θ4 when θ2=120°. -0.075 0.13

  2. Solutions of system of nonlinear equations: Following changes are made in the computer program. clc, clear x=[0.5 1] ; err=[0.01 0.01]; niter1=10;niter2=50; err=transpose(abs(err)); for n=1:niter2 x %Error Equations--------------------------- a(1,1)=-0.45*sin(x(1));a(1,2)=0.28*sin(x(2)); a(2,1)=0.45*cos(x(1));a(2,2)=-0.28*cos(x(2)); b(1)=-(0.45*cos(x(1))-0.28*cos(x(2))-0.275); b(2)=-(0.13+0.45*sin(x(1))-0.28*sin(x(2))); %---------------------------------------------- bb=transpose(b);eps=inv(a)*bb;x=x+transpose(eps); if n>niter1 if abs(eps)<err break else display ('Roots are not found') end end end (Initial angle values must be given in RADIAN) ANSWER: θ3=0.216 rad (12.37°) θ4=0.942 rad (53.97°) Alternative solution with MATLAB clc;clear [x,y]=solve('0.45*cos(x)-0.28*cos(y)=0.275','0.13+0.45*sin(x)-0.28*sin(y)=0'); vpa(x,6) vpa(y,6)

  3. Solutions of system of nonlinear equations: Newton-Raphson Example 5: Kinematic equations for a crank mechanism are given below (5th semester Mechanisms Course) L2=0.15 mL3=0.6 m θ3 L2 L3 θ2 s Where link 2 (crank) is the input member. How dou you calculate θ3 and s with computer when θ2=60°. 0.075 0.1299

  4. Solutions of system of nonlinear equations: Following changes are made in the computer program. clc, clear x=[-1 0.8] ; err=[0.01 0.01]; niter1=10;niter2=50; err=transpose(abs(err)); for n=1:niter2 x %Error Equations--------------------------- a(1,1)=-0.6*sin(x(1));a(1,2)=-1; a(2,1)=0.6*cos(x(1));a(2,2)=0; b(1)=-(0.075+0.6*cos(x(1))-x(2)); b(2)=-(0.1299+0.6*sin(x(1))); %---------------------------------------------- bb=transpose(b);eps=inv(a)*bb;x=x+transpose(eps); if n>niter1 if abs(eps)<err break else display ('Roots are not found') end end end ANSWER: θ3=-0.2182 rad (-12.5°) s=0.6607 m Alternative solution with MATLAB clc;clear [x,y]=solve('0.075+0.6*cos(x)-y=0','0.1299+0.6*sin(x)=0'); vpa(x,6) vpa(y,6)

  5. Graph Plotting: Given: z=0.36 ω0=24*2*π (rad/s) A=1.2 Φ=-42*π/180 (rad)=-0.73 rad ω ω0=150.796 rad/s α -σ Example 1: From a vibration measurement on a machine, the damping ratio and undamped vibration frequency are calculated as 0.36 and 24 Hz, respectively. Vibration magnitude is 1.2 and phase angle is -42o. Write the MATLAB code to plot the graph of the vibration signal.

  6. Graph Plotting: clc;clear t=0:0.002:0.1155; yt=1.2*exp(-54.3*t).*cos(140.7*t+0.73); plot(t,yt) xlabel(‘Time (s)'); ylabel(‘Displacement (mm)');

  7. Solutions of system of nonlinear equations: Example 2: The time-dependent locations of two cars denoted by A and B are given as At which time t, two cars meet?

  8. Solutions of system of nonlinear equations: Alternative Solutions with MATLAB clc;clear t=solve('t^3-t^2-4*t+3=0'); vpa(t,6) Newton-Raphson Example 2: clc, clear x=1;err=0.001; niter=20; %---------------------------------------------- for n=1:niter %---------------------------------------------- f=x^3-x^2-4*x+3; df=3*x^2-2*x-4; %---------------------------------------------- eps=-f/df; x =x+eps; if abs(f)<err break end end display('Answer is='),x Using roots command in MATLAB a=[ 1 -1 -4 3]; roots(a) ANSWER t=0.713 s t=2.198 s

  9. Simpson’s Rule: 4.2i -1.4 Example 3: Calculate the integral of the given function.

  10. Simpson’s Rule: Solution with Matlab: >>clc;clear; >> syms teta >>f=2.5*exp(-1.4*teta)*cos(4.2*teta+1.4) >>y=int(f,0,4.49) >>vpa(y,5) I=-0.4966

  11. Simpson’s Rule: Example 4:

  12. Simpson’s Rule: Solution with Matlab: >>clc;clear; >> syms teta >>f=(2.5*exp(-1.4*teta)*cos(4.2*teta+1.4))^2 >>y=int(f,0,4.49) >>vpa(y,5) I=0.898 We must increase the number of sections!

  13. Simpson’s Rule: Example 5: Calculate the volume of the 3meter-long beam whose cross section is given in the figure. Solution with Matlab: >>syms x; area=int((x+1)/(sqrt(x^2+4)),0,1.2);vpa(area,5) Area=0.9012

  14. Lagrange Interpolation: Example 6: The temperature (T) of a medical cement increases continuously as the solidification time (t) increases. The change in the cement temperature was measured at specific instants and the measured temperature values are given in the table. Find the cement temperature at t=36 (sec). Thermometer With Matlab: >>clc;clear >> t=[5 15 55]; >> T=[30 43 68]; >> interp1(t,T,36,'spline') Medical cement

  15. Lagrange Interpolation: Example 7: The buckling tests were performed in order to find the critical buckling loads of a clamped-pinned steel beams having different thicknesses. The critical buckling loads obtained from the experiments are given in the table. Find the critical buckling load Pcr (N) of a steel beam with 0.8 mm thickness. Pcr 0.8 mm

  16. Lagrange Interpolation: data.txt 0.5,30 0.6,35 0.65,37 0.73,46 0.9,58 Pcr 1. Lagrange Interpolation with Matlab clc;cleart=[0.5 0.6 0.65 0.73 0.9];P=[30 35 37 46 58];interp1(t,P,0.8,'spline') 0.8 mm 2. Lagrange Interpolation with Matlab clc;clear v=load ('c:\saha\data.txt') interp1(v(:,1),v(:,2),0.8,'spline')

  17. Roots of a polynomial: Find the roots of the polynomial. with Matlab >> p=[3 0 5 6 -20] >> roots(p) >>ezplot('3*t^4+5*t^2+6*t-20',-2,2) ans = -1.5495 0.1829 + 1.8977i 0.1829 - 1.8977i 1.1838 Example 8:

  18. Solution of system of nonlinear equations: How do you find x and y values, which satisfy the equations? with Matlab: >>[x,y]=solve('sin(2*x)+y^3=3*x-1','x^2+y=1-y^2') x=0.6786, y=0.3885 Example 9: clc, clear x=[1 1]; err=[0.01 0.01]; niter1= 5; niter2=50; err=transpose(abs(err)); for n=1:niter2 x %-----Error equations------------------------ a(1,1)=2*cos(2*x(1))-3;a(1,2)=3*x(2)^2; a(2,1)=2*x(1);a(2,2)=2*x(2)+1; b(1)=-(sin(2*x(1))+x(2)^3-3*x(1)+1); b(2)=-(x(1)^2+x(2)^2+x(2)-1); %------------------------------------------------------- bb=transpose(b);eps=inv(a)*bb;x=x+transpose(eps); if n>niter1 if abs(eps)<err break else display ('Roots are not found') end end end x=0.6786 y=0.3885

  19. Solution of system of nonlinear equations: Example 10: How do you calculate a and b, which satisfy given equations by computer? clc, clear x=[1 1]; err=[0.01 0.01]; niter1= 5; niter2=50; err=transpose(abs(err)); for n=1:niter2 x %-----Error equations------------------------ a(1,1)=6*x(1);a(1,2)=4*x(2); a(2,1)=6*x(1)^2;a(2,2)=2*(x(2)-1); b(1)=-(3*(x(1)^2-1)+2*x(2)^2-11); b(2)=-(2*x(1)^3+(x(2)-1)^2-16); %------------------------------------------------------- bb=transpose(b);eps=inv(a)*bb;x=x+transpose(eps); if n>niter1 if abs(eps)<err break else display ('Roots are not found') end end end With Matlab >>[a,b]=solve('3*(a^2-1)+2*b^2=11','2*a^3+(b-1)^2=16') Matlab gives all possible solutions

  20. Lagrange Interpolation: Example 11: • The pressure values of a fluid flowing in a pipe are given in the table for different locations . Find the pressure value for 5 m. • a) Lagrange interpolation (manually) • with computer a) with Lagrange interpolation b) For computer solution, the MATLAB code is given as clc;clearx=[3 8 10];P=[7 6.2 6];interp1(x,P,5,'spline')

  21. Lagrange Interpolation: Example 12: The x and y coordinates of three points on the screen, which were clicked by a CAD user are given in the figure. Find the y value of the curve obtained from these points at x=50. • How do you find the answer with computer? clc;clearx=[25 40 70];y=[-10 20 5];interp1(x,y,50,'spline') Result: 26.111 b) How do you find the answer manually?

  22. Simpson’s Rule: Example 14: Calculate the integral with; a) Trapezoidal rule b) Simpson’s rule (take n=4), c) Using MATLAB. a) Trapezoidal rule: Divide into four equal sections between 0.5 and 1.

  23. Simpson’s Rule: b) Simpson’s rule: using Matlab >>syms tet >>I=int(sqrt(tet)*cos(tet),0.5,1); >>vpa(I,5) I=0.30796

  24. Lagrange Interpolation + Simpson’s Rule: Example 15: For a steel plate weighing 10 N and has a thickness 2 mm, the coordinates of some points shown in the figure were measured (in cm) by a Coordinate Measuring Machine (CMM). How do you calculate the density of the steel by fitting a curve, which passes through these points. ? a) Manual calculation: The volume of the part is calculated by using its surface area and 0.2 cm thickness value. The simpson’s rule is used for area calculation. The x axis must be divided in equal segments in this method. Since the points are not equally spaced on the x axis, the necessary y values should be calculated at suitable x values. If we divide the interval 0-4 into four equal sections using the increment ∆x=1 , we can obtain the y values for x=1, x=2 and x=3.

  25. Lagrange Interpolation + Simpson’s Rule:

  26. Lagrange Interpolation + Simpson’s Rule: b) With computer: For calculation with computer, MATLAB code is arranged to find the y values for x=1, x=2 and x=3 and the code Lagr.I is run. clc;clearx=[0 2.5 3.7 4];y=[5 7.8 9.3 10];interp1(x,y,1,'spline') interp1(x,y,2,'spline') interp1(x,y,3,'spline') The area of the plate can be calculated by using Simpson’s rule. Then, the density of the steel can be calculated as mentioned before.

  27. Simpson’s Rule: Example 16: A stationary car starts to move with the acceleration given below • Find the speed of the car at the end of 10 seconds • Manually • With computer a) b) With computer using Matlab >>syms t >>I=int((1+sin(t)^3)/sqrt(t^2+1),0,10);vpa(I,5)

  28. Simpson’s Rule: Roots Example 17: Find the intersection area of the curves y=x2+2 and y=3x . >> roots([1 -3 2]) using Matlab >>syms x >>I=int(3*x-x^2-2,1,2);vpa(I,5)

  29. System of linear equations: Example 18: How do you calculate u,w and z with computer? With Matlab clc;clear a=[-1 1 -3;0 3 -6;1 1 1]; b=[9;12;5]; c=inv(a)*b

  30. System of linear equations: F b A Example 19: As a result of the equilibrium conditions, the equations given below are obtained for a truss system. How do you calculate the member forces FJD, FFD, FCD and FFC if FCK=6.157 kN and FCB=-3.888 kN are known?

  31. System of linear equations: with Matlab clc;clear A=[-1 -0.707 -0.894 0;0 -0.707 -1 0;3 0 0 2.365;0 0 0.894 1]; b=[-0.466;0;-6.557;4.353]; F=inv(A)*b FJD= 1.5429 kN FFD= -14.3701 kN FCD= 10.1596 kN FFC= -4.7297 kN F b A

More Related