1 / 15

The LT Dipole

The LT Dipole. July 8 th , 2014. Motivation. Combine expertise of LBNL & TAMU to overcome common obstacles and reach higher fields with regular milestones Modular approach LT1: 13T Nb 3 Sn open-aperture (9x5 cm 2 ) LT2: 15T, LT1 + a racetrack of BSCCO-2212

ophrah
Download Presentation

The LT Dipole

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The LT Dipole July 8th, 2014

  2. Motivation • Combine expertise of LBNL & TAMU to overcome common obstacles and reach higher fields with regular milestones • Modular approach • LT1: 13T Nb3Sn open-aperture (9x5 cm2) • LT2: 15T, LT1 + a racetrack of BSCCO-2212 • LT3: 19T, LT2 + a flared winding of BSCCO-2212 • Stress management and continuous support of reacted cable to avoid damage losses

  3. Magnetics for LT1

  4. Magnetics for LT2

  5. Magnetics for LT3 Stress management structure

  6. Before pancake winding Window for quench heaters and voltage taps Add pic of just mandrel

  7. Mandrel ‘heart’ Common design allows part reuse Thin-skin slots into place Magnetic cutout also serves as a slot

  8. Pancake and associated structure

  9. Pre-structure for flare These pieces provide supported form, and allow safe removal of flare • 873mm bending radius, 10° arc (same as HD3)

  10. Flared winding and structure Window for quench heaters and voltage taps Pins for flare?

  11. Remove mandrel ‘heart’ and install spanner plates Aperture now cleared in end pieces • Continuous support of Nb3Sn mitigates assembly damage

  12. Assembling two halves Common wall pushes out plates through thick-skin • Continuous support of Nb3Sn mitigates assembly damage

  13. Removal of spanner plates

  14. Completed coil package

  15. Bladder/key magnet assembly • Similar to HD2/HD3, yoke is keyed against shell, then coil package is inserted and keyed

More Related